Radiator Paint

Radiator Paint spray cans with heat resistant paint for a sleek finish

Radiator Paint is a special heat resistant paint designed to give radiators and heating parts or elements a new color. This heat resistant paint for radiators can withstand temperatures as high as 80°C or higher without any problems, keeping the color nice and not yellowing or flaking off. Radiator paint is widely used when refurbishing old heaters, as well as for a high-quality finish on new radiators. The unique thing about radiator paint is that you can also use it for towel radiators, hot water pipes, boiler parts and other thermal appliances. By choosing radiator paint, you extend the life of your heating system and provide a clean, fresh look to match your interior.

Benefits of an aerosol radiator paint

Using an aerosol of radiator paint offers several practical benefits:

• More even coverage: no brush marks and a professional result.
• Easy to use: ideal for round shapes and hard-to-reach corners.
• Quick to apply: several thin coats dry quickly, allowing you to finish faster.
• Durable: the paint adheres well and stays beautiful for a long time, even at high temperatures.

Our spray cans of radiator paint contain high-quality heat resistant lacquer that is suitable for both indoor and outdoor use (e.g. outdoor pipes).

Preparing your radiator before painting

Proper preparation is crucial for a sleek and durable end result. By performing these steps carefully, you will ensure that the new coat of paint will adhere perfectly and remain beautiful for years to come. Follow these steps to prepare your radiator for painting:

1. Turn off the heater and allow the radiator to cool completely.
2. Clean the radiator thoroughly with warm water and degreaser to remove dust, grease and dirt.
3. Remove old paint or rust residue with sandpaper or a wire brush.
4. Lightly sand the entire surface for better adhesion.
5. Protect the surrounding area with masking tape and masking film to prevent paint splatter.

Applying radiator spray paint in 7 steps

Applying radiator spray paint is easily done in 7 steps. The right process ensures a professional result. Follow the steps below to apply radiator paint the right way.

1. Bring spray can up to temperature: Make sure the spray can is at room temperature (about 20°C).
2. Shake well: Shake the spray can for at least 2 minutes to mix the paint well.
3. Testing: Spray a small test piece on cardboard first to check the spray.
4. Keep distance: Hold the spray can 25-30 cm from the surface.
5. Build up thin layers: Apply several thin layers in even strokes.
6. Allow to dry briefly between coats: Wait several minutes between coats to prevent drips.
7. Curing: Allow the radiator to dry for at least 24 hours before using it again.

This method will give you a tight, even and durable finish that can withstand daily use.

Drying time and curing of radiator lacquer

Radiator paint usually dries to dust within a few hours, but needs about 24 hours to fully cure. Factors such as temperature, humidity and layer thickness affect this time. Do not turn the radiator back on until the paint is fully cured to avoid damage.

Buy radiator paint at CROP

Buy radiator paint at CROP from a wide selection. Online in our shop you choose from the best quality in different colors and finishes. Order your radiator paint in spray can before 10 p.m. and receive it the next day.