Bison Wood Glue
Bison Wood Glue is a white glue for wood that dries transparent. The moisture-resistant and high-quality wood glue is suitable for laminating and gluing virtually all hard, soft and exotic types of wood.
Wood glueing
Bison wood glue is suitable for well-fitting, non-load-bearing wood constructions by means of, for example, finger welding, dovetails, pin-hole joints, dowels and springs. It is suitable for many applications such as:
- doors
- furniture
- hardboard
- chipboard
- plywood
- MDF
- paper
- cardboard
- board
- veneer and hard plastic sheet
How do I use Bison wood glue?
Bison wood glue is suitable for various applications. The temperature of the environment, the glue and the materials to be glued should not be lower than +5°C. Relative humidity of maximum 65%. Wood humidity between 8% and 12%.
- Surface must be clean, dust-free and dry for maximum adhesion.
- Greasy wood alvores well degreased.
- Apply the wood glue evenly and thinly using a brush.
- Leave for a few minutes, then bring the parts together and clamp or press for 1-2 hours.
- The desired pressing pressure is 2-5kg/cm².
- Remove wet adhesive residues immediately with water.
- Store in tightly closed packaging in a dry place at a temperature between +10°C and +20°C.
Characteristics Bison Wood Glue
- Transparent drying
- Paintable
- Solvent-free
- Stronger than wood
- Moisture resistant and ideal for indoor applications (EN 204 D2)
