2K Polyester Repair Resin with Fibreglass Mat
MoTip Polyester Repair Kit is a complete set for repairing holes and cracks. This kit contains 2K Polyester resin, hardener and a fiberglass mat. You can repair damages in bumpers, spoilers and other car parts!
Repair holes and cracks in bumpers
Does your car bumper have holes or cracks? With this 2-component polyester repair kit you can repair all cracks and holes by making use of the included fiberglass mat. After hardening the resin, a fine filler can be applied. Afterwards, the bumper can be sprayed!
Elastic epoxy resin
MoTip Polyester Resin based on Epoxy is permanently elastic. Even when the resin is fully cured! As a result, the resin does not shrink and prevents cracks or breaks in the repaired surface. With this resin you are assured of a long-lasting repair.
How do I use MoTip 2K Polyester Repair Resin?
- Cut the fibreglass mat in the correct size, with a small overlap. Mix the required amount of polyester resin with the harder.
- Lubricate the edges of the hole to be filled with polyester resin and apply the fibreglass mat.
- Lubricate the mat with polyester resin, starting at the edge
- Then apply the fibreglass fleeze and lubricate the polyester resin
- Depending on the damage, this procedure can be repeated
- After hardening, only mechanically sandable
- After hardening, sand and when desired apply a fine putty
What does the set contain?
- Polyester resin
- Hardener
- Fibreglass mat
Product Features MoTip 2K Polyester Repair Set
- Set contains a fibreglass mat and harder
- For holes and cracks
- Adheres to aluminium, steel, wood, concrete and polyester
- Mechanically sandable
- Available in 250 gram and 1kg
Technical data & drying times
- Mixing ratio: 2,5%
- Sandable after 40 minutes
- Evaporation time: 60 minutes
- Processing time: 6 to 8 minutes
- Heat resistant up to 120°C degrees
