MOTIP Plastic Primer for Plastics in 400ml Aerosol

MoTip plastic primer

High-quality, fast-drying primer for treating untreated surfaces of many types of plastic.

Features of the MoTip plastic primer

• Fast drying
• Excellent adhesion
• Sprayable with all lacquer systems
• Not suitable for the treatment of PE
  

Properties

• Base: Polyolefin resin
• Colour: Transparent
• VOC content: Approximately 99% w / w
• Solids: Approximately 1% w / w
• Yield: 2 to 3 m²
• Recoat: After 10 to 15 minutes

How to use the primer?

1. Before use, read the instructions on the package and follow them.
2. The surface must be clean, dry and free of grease.
3. Possibly slightly sand the surface, 600 grit.
4. The surface must be clean, dry and free of grease.
5. The aerosol at room temperature.
6. Ideal processing temperature is 15 to 25 ° C.
7. Before use, shake the aerosol for 2 minutes and spray a sample.
8. Distance to the to be treated surface approximately 25 to 30 centimetres.
9. Apply the primer in up to 2 thin layers.
10. After drying, without sanding sprayable with all paint systems.
11. After use, clean the valve (aerosol upside down and the nozzle for approximately 5 seconds).
12. The drying time depends on the ambient temperature, humidity and film thickness.