FINIXA Fine 2K Polyester Putty + Hardener

Finixa 2K Fine Polyester Putty

FINIXA 2K Fine Polyester Putty has a very thin structure in a bright white color. Thanks to the thin structure, it can be used after a universal putty. It has a high filling capacity and elasticity.

Can be used after a universal putty

FINIXA GAP10 Putty is a special fine putty that can be used after a filler (for example FINIXA GAP10 Multi 2K Putty). By using this putty, you can remove small imperfections, limit paint damage and scratches. After curing, it can be easily sanded!

Filling small imperfections & holes

FINIXA GAP10 Fine Putty is the best 2K putty for filling small irregularities and holes. Thanks to the thin structure, it fills the smallest holes and micro pinholes. After curing, the filler doesn't shrink and retains its original structure.

Features FINIXA GAP20 Fine Putty

• Fine finishing putty. To be used after “MULTI” putty to remove small irregularities.
• To be applied in thin and very thin coats
• Bright white pigmentation
• High filling power
• A real ‘finishing’ putty
• Easy to apply and sand
• High elasticity
• To fill pin holes, small irregularities, small paint damages or scratches
• No sinking of the top coat

Technical specifications FINIXA GAP20 Fine Putty

• Binder: unsaturated polyester resin
• 2% hardener
• Too much or too less use of hardener can have consequences for the end result
• Pot life at 20 degrees Celsius: 3 to 4 minutes
• Can be sanded after 20 minutes (dry or wet)

What is the mixing ratio?

• Mix with 2 to 3% hardener. If in doubt, use a scale during mixing. Too much hardener not only causes too fast hardening but can also lead to detachment through paint.
• Carefully mix the putty with hardener and avoid withdrawing air. Air bubbles result in imperfections during application and sanding.
• Choose the right putty for the right application.