CROP 2K Fiberglass Putty 750ml + Hardener

CROP Fiberglass Putty 750ml

CROP Fiberglass Putty 750ml is a large pot of professional 2K polyester putty that is fiberglass reinforced. This makes the fiberglass putty flexible and highly resistant to rust, chemicals, water and moisture. You can apply CROP's fast drying 2K fiberglass putty in several thick layers, allowing you to fill deep cracks, dents and holes. After the 2 component putty is dry, you can easily sand the putty smooth. The 750ml jar of fiberglass putty makes it ideal for large jobs!

Fiberglass putty for all materials

This fiberglass putty adheres to all materials, whether the surface is treated or untreated. Because of this, you can use the 2K fiberglass putty for any job where you want to level the surface so that it is completely smooth again. Thus, the fiberglass putty adheres to, among others:

• Metal
• Aluminum
• Plastic
• Carbon / fiberglass
• Plastic
• Galvanized steel
• Existing lacquer or paint

Putty for rust on car

Do you want to put putty directly on rust on your car? You do with this 2K fiberglass putty 750ml. Because the 2K polyester putty is fiberglass reinforced, the putty adheres directly to car rust. By puttying rusted metal you encapsulate the corrosion and prevent further rusting. After you apply and sand the fiberglass putty, it is repaintable with a primer of your choice!

2K glass fiber reinforced putty

2K putty fiberglass reinforced by CROP is a special putty that is incredibly strong yet flexible and flexible. This fiberglass putty has good filling power and adheres strongly to a wide variety of materials. Because the polyester 2K putty is fiberglass reinforced, it will not crack or break when fully cured. The putty remains flexible and smooth!

Sanding fiberglass putty? You need this grit!

You sand fiberglass putty once it is fully cured. For sanding fiberglass putty, we recommend grit P80 to start with. Then continue sanding in steps to P120 and P180 for a nice tightly sanded fiberglass putty. After the putty is dry you can apply your desired primer that serves as a primer for your paint.

Features CROP 2K Fiberglass Putty 750ml

• Professional fiberglass putty
• 750ml pot of putty is ideal for large jobs
• Polyester putty with fiberglass is extra strong
• Stays flexible so the putty does not break or crack
• Putty is easy to sand (P80 to P180)
• This putty is air-drying at room temperature

Mixing ratio glass fiber 2K putty

The fiberglass 2K putty mixing ratio is 2 to 3%. Add between 2 and 3% hardener to the putty and mix the two components well while making the putty. Use a mixing pad with a spatula or putty knife to do this. Too much hardener can lead to too rapid curing and can also cause the putty to detach or mark through the paint. Therefore, always mix the putty with hardener carefully and avoid drawing in air while mixing.