FINIXA Fiber 2K Polyester Putty + Hardener

2K Putty with glass fibres

FINIXA Fiber 2K Putty is a universal filler with impregnated fibers. These impregnated glass fibers ensure that the 2-component filler can be easily and evenly spread and finished. It is ideally suited for repairing major damage, holes and cracks caused by corrosion.

Water resistant: ideal for reparing boats and ships

FINIXA GAP40 Putty is a 2-component putty resistant to water and moisture. This makes it ideal for repairing cracks, holes and irregularities in boats and ships. The fiberglass-reinforced filler ensures a permanent and watertight recovery of damage.

Bridging cracks, small holes & rusted-through areas

This 2K fiberglass putty has been specially developed for bridging large cracks, small holes and rusted-through areas. Thanks to the high filling power, large irregularities can be filled to a tight and even surface.

Features FINIXA GAP40 Fiber Putty

• Universal polyester putty with glass fibres to fill up larger surfaces and bigger irregularities
• Impregnated fibres for easy and equal spreading and finishing  
• Perfect for polyester applications and repairs
• For bridging of cracks, small holes and rusted-through areas
• Waterproof; ideal for boat & marine repairs
• Good adhesion on glass fibre reinforced materials
• High stability
• Limited sandability

Technical specifications FINIXA GAP40 Glass Fibre Putty

• Polyester putty with glass fibres
• 2% hardener
• Too much or too less use of hardener can have consequences for the end result
• Pot life at 20 degrees Celsius: 3 to 4 minutes
• Can be sanded after 20 minutes (dry or wet)

What is the mixing ratio?

• Mix with 2 to 3% hardener. If in doubt, use a scale during mixing. Too much hardener not only causes too fast hardening but can also lead to detachment through paint.
• Carefully mix the putty with hardener and avoid withdrawing air. Air bubbles result in imperfections during application and sanding.
• Choose the right putty for the right application.