CROP Fiberglass Putty 125ml
CROP Fiberglass Putty 125ml is a small jar of professional 2K polyester putty that is fiberglass reinforced. This makes the fiberglass putty flexible and highly resistant to rust, chemicals, water and moisture. You can apply CROP's fast-drying 2K fiberglass putty in several thick layers, allowing you to fill deep cracks, dents and holes. After the 2 component putty is dry, you can easily sand the putty smooth. Thanks to the mini 125ml jar of fiberglass putty, it is ideal for small jobs!
Fiberglass putty adheres to many materials
This fiberglass putty adheres to many materials, whether the surface is treated or untreated. As a result, you can use the fiberglass putty for any job where you want to level the surface so that it is completely smooth again. Thus, the 2K putty with fiberglass adheres to a.o:
- Metal
- Aluminum
- Plastic
- Carbon / fiberglass
- Plastic
- Galvanized steel
- Existing lacquer or paint
Fiberglass putty car
Putty your car with fiberglass putty? Because this 2K polyester putty is fiberglass reinforced, the putty is ideally suited for filling imperfections in body panels and car parts. The flexible putty is elastic so it will not crack or break on moving parts on the car such as a bumper, spoiler or side skirt. With this car fiberglass putty, restore the panel or part factory original!
Apply putty directly to rust
Want putty that adheres directly to rust. You can apply this CROP fiberglass putty directly to metal that has rust or corrosion on it. First remove loose rust particles after which you can apply the putty in several layers. The putty encapsulates all forms of corrosion and prevents further rusting of metal.
Sanding fiberglass putty? You need this grit!
Sanding fiberglass putty is done once it is fully cured. For sanding fiberglass putty, we recommend grit P80 to start with. Then continue sanding in steps to P120 and P180 for a nice tightly sanded fiberglass putty. After the putty is dry you can apply your desired primer that serves as a primer for your paint.
Features CROP 2K Fiberglass Putty 125ml
- Professional fiberglass putty
- 125ml jar of putty is ideal for small jobs
- Polyester putty with fiberglass is extra strong
- Remains flexible so the putty does not break or tear
- Putty is easy to sand (P80 to P180)
- This putty is air-drying at room temperature
Mixing ratio glass fiber 2K putty
The fiberglass 2K putty mixing ratio is 2 to 3%. Add between 2 and 3% hardener to the putty and mix the two components well while making the putty. Use a mixing pad with a spatula or putty knife to do this. Too much hardener can lead to too rapid curing and can also cause the putty to detach or mark through the paint. Therefore, always mix the putty with hardener carefully and avoid drawing in air while mixing.
