CROP 2K Air Dry Primer GREY 1 liter

0 reviews

CROP 2K Air Dry Primer GREY 1 liter
Choose your amount
  • 1x €23.99
  • 4x €23.28 €93.12 Save 3%
  • 8x €22.80 €182.40 Save 5%
  • 12x €21.60 €259.20 Save 10%
  1. Complete Your Purchase
  2. Product information
  3. Pros and cons
  4. Specifications
  5. Frequently asked questions
  6. Product reviews
  7. Comparable products
Product information

CROP 2K Air Dry Primer 1 liter

CROP 2K Air Dry Primer 1 liter is known for its very fast drying time without sacrificing high quality. This HS air dry filler has been voted the best 2K primer for car, motorcycle and all surfaces to be sprayed in primer. CROP gray 2K air dry primer is dry in 15 minutes at 20°C and you can sand after 50 minutes. This air dry primer is excellent filling and a super insulating primer.

High Solid primer air dry

Do you want to buy a High Solid primer that is air dry? This filling primer has a high solids content that fills cracks, holes, micro pinholes, sanding scratches and other imperfections. The HS 2K air-drying primer is fully cured in 50 minutes after which you can sand it smooth to a sleek surface. In short, the perfect base to finish with a 1K or 2K paint.

Sanding primer

Because this primer is a special air-drying primer, it is already fully cured in 50 minutes at 20 degrees Celsius. This allows you to sand the primer to a tight and smooth surface within an hour. It's best to sand 2K primer with P280 to P400. Do you prefer to wet sand primer? Then use waterproof sandpaper P400 to P600.

Spraying air dry primer

Spray this air dry primer using a paint sprayer with a 1.5 mm, 1.6 mm or 1.8 mm nozzle opening at a pressure of 2.5 to 3 bar. Follow the steps below to properly spray this HS primer.

  1. Adjust your paint sprayer to a compressed air pressure of 2.5 to 3 bar maximum.
  2. Make sure the surface is clean, dry and dust-free.
  3. Spray a first coat of primer and wait 1 to 3 minutes for it to evaporate.
  4. Spray a 2nd coat of primer and allow it to dry completely.
  5. Basically, two coats of primer are sufficient.

Mixing ratio HS 2K air drying filler 1 liter

The mixing ratio of the HS 2K air drying filler is 5:1. This means that to 1 liter of clear coat, you must add 200ml of hardener. If desired, you can dilute the primer including hardener up to 5% with CROP Universal Thinner for the desired viscosity.

Drying time air drying primer HS

Drying time of air drying primer HS is extremely fast. Keep the following guidelines concerning the drying time of this 2 components air dry primer at 20 degrees Celsius.

  • Dust dry: 15 minutes
  • Can be handled: 30 minutes
  • Sandable: 50 minutes

Features CROP 2K Air Dry Primer 1 liter

  • Best 2K air dry primer
  • Primer gray universal
  • Excellent insulating effect
  • This HS air dry primer is used professionally and OEM
  • Very short drying time
  • Good filling primer
  • Paintable with 1K and 2K lacquer or paint
  • Primer is easy to sand
  • Excellent flow and does not shrink
  • Supplied without hardener and thinner

Technical data CROP Air Dry 2K Primer Filler

  • Recommended nozzle openings: 1.5mm, 1.6mm or 1.8mm
  • Recommended spraying pressure: 2.5 to 3 bar
  • Evaporation time between spray coats: 1 to 3 minutes
  • Oven drying time: 5 minutes at 60 degrees Celsius
  • Mixing ratio hardener: 5:1
  • A 5% dilution can be used
  • Shelf life: 1 year
Full product information

Pros and cons

  • Special 2K air-drying primer with a very fast drying time
  • Fills irregularities in the surface
  • Easy to sand primer
  • Can be repainted with 1K and 2K lacquer or paint
  • Available only in the color gray

Specifications

SKU 2767-1160
Paint component 2K (2-component)
Gloss level Matt
Quality 2K air dry
Type Primer
All specifications

Frequently Asked Questions

Product reviews

0/5

Based on 0 review

Write your review
Comparable products