MOTIP 1K Filler Beige/Grey in 400ml Aerosol
MOTIP 1K Filler Beige/Grey in 400ml Aerosol is a very high build quality and spray filler for filling imperfections in treated and untreated surfaces of wood, metal, aluminium and stone.
It is a suitable primer / filler as a pre-treatment before coating with alkyd resin, nitro cellulose, acrylic 1K and 2K acrylic lacquers. It also has high hiding power, creates a perfectly smooth base and is economical.
Application:
- For the treatment of treated and untreated wood, metal, aluminium and stone
Advantages:
- Fast drying
- High solids content and coverage
- Good surface hardness
- Excellent adhesion
- Sustainable
- Good corrosion protection
- Good sand, both wet and dry (from 400 grit)
- Fills
- Good adhesion
- Sprayable with all paint systems
- Heat resistant: Up to 110 ° C
Binder / basis:
- High-quality Acrylic resin
Application:
- Spray distance: about 25 cm.
- Number of cross coats: 2 (40-50 microns)
- Flash-off between coats: 5-10 minutes
Drying times:
- Dust dry: after approx. 5-10 min / 20 ° C
- Hardened / re-sprayable: after 2 hours / 20 ° C
| SKU | M04062 |
|---|---|
| Brand | MoTip |
| EAN | 8711347040629 |
| Components | 1K (1-component) |
| Packing | 1 piece |
| Category | Alloy Wheel Repair |
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
