MIPA Spritzspachtel spray putty
Spritzspachtel from MIPA is a spray putty in a professional aerosol can, which is suitable for filling holes, cracks, bumps and other irregularities in surfaces. The product dries quickly and has a very high filling power with which you can fill small and large irregularities on most surfaces. Once the filler is completely dry, you can sand it down to a perfectly smooth surface.
How do I apply spray putty?
Spritzspachtel is an easy-to-apply spray putty. Follow the step-by-step plan below to easily fill holes, dents and cracks with this handy spray putty.
- First remove any loose paint or varnish.
- Sand the surface until there is no rust.
- Clean and degrease the surface.
- Shake the spray can for several minutes just before use.
- Maintain a distance of 15 cm between nozzle and substrate.
- Spray the filler in 2 to 3 coats until the desired thickness is achieved.
- Allow 5 minutes to evaporate between coats.
- The filler can be sanded after about 1 hour at 20°C.
- Done? Turn the can upside down and press the nozzle until only the propellant comes out to clean.
Sprayable car filler
MIPA's spray putty is perfect for filling holes and cracks in car body parts. The spray putty adheres strongly to auto body parts and effectively fills holes, cracks and other surface irregularities. Spray filler, allow to dry, sand the filler until the bodywork has regained its original appearance, then degrease and apply the next coat.
Features of MIPA Spritzspachtel spray putty
- High filling power
- Quick-drying spray putty
- Rustproof effect
- Very durable
- Suitable for treated and untreated surfaces
- Easy to sand, wet or dry (from grain size 400)
- Excellent adhesion
- Drying time of the sprayable filler
- Dust free: 5 to 10 minutes at 20°C
- Manageable: 15 minutes at 20°C
- Can be recoated with another finish after 2 hours at 20°C
- Do not use on aluminium
- Do not apply polyester filler after spraying Spritzspachtel
- Not suitable for covering with synthetic resin
