CROP Spray Putty 400ml - Professional

CROP Spray Putty - Professional

Spray putty aerosol from CROP which fill scratches, cracks, holes and dents so that the surface is completely smooth again. The CROP aerosol spray putty you can spray on all materials and substrates in which unevenness is present to level them again so that the surface is smooth. After the spray putty is dry you can sand the putty to a tight surface. Thanks to its high quality, this spray putty is fast drying and easy to apply.

Spray putty

Spray putty in aerosol works incredibly easy and fast. With this filling putty in spray can from CROP, you make a surface completely smooth again. Thanks to its high solids content, the spray putty has great filling power and does not collapse. After the spray putty is dry, you can refinish it with 1K and 2K primer or paint of your choice.

How to spray putty?

1. Before you begin, you need to remove loose paint and lacquer.
2. Clean the surface with degreaser.
3. Shake the spray well before use.
4. Spray the spray putty in 2 or 3 coats until you reach the desired filling power.
5. Between spray coats, pause for 5 minutes to allow the spray putty to evaporate.
6. While spraying, be sure to keep a distance of 10 to 15cm from the surface.
7. After 40 minutes at 20°C, you can sand the spray putty.
8. Ready and want to use the spray again next time? Turn the spray can over and spray the nozzle empty until only propellant comes out. Now the suction tube and spray cap is clean, ready for the next use.

Features CROP Spray Putty aerosol

• Spray putty with very high filling power
• High solid spray putty has a high solids content
• Does not shrink and does not shrink
• This spray putty is both dry and wet sandable
• Paintable with water-based and solvent-based paints or lacquers
• Very fast drying time
• Incredibly easy and reusable
• Spray putty is gray in color
• Dries matt