Hammerite Anti Rust Spray
- 1 unit €15.65
-
4 units
Save 2% ea. €15.34
-
8 units
Save 3% ea. €15.18
-
12 units
Save 5% ea. €14.87
- 100 days returns & exchanges
- Customer reviews: 4.26/5 (857 reviews)
Hammerite Anti rust spray
Hammerite Anti rust spray is a primer spray that you can spray on bare and rusted metal. The primer anti-rust spray from Hammerite stops the rust immediately and has an anti-corrosion property that prevents treated metal from rusting in the future. Hammerite anti-rust spray cannot be used on non-ferrous metals (zinc, aluminum and galvanized steel).
Primer anti-rust spray can
This Hammerite spray can is a primer anti-rust spray to spray directly over metal that has rusted. The Hammerite anti-rust spray stops rusting and applies a protective layer that is incredibly durable. Thanks to the spray can, you can use this anti-rust spray to get into hard-to-reach places that a brush or roller can't reach.
How to use Hammerite anti-rust spray?
Hammerite anti-rust spray is easy to use for spraying an anti-corrosion primer in places that are hard to reach with a paint roller or brush. The spray works very accessible and can be used by anyone. Use the step-by-step plan below on how to use Hammerite anti-rust spray.
- Remove paint and rust that is loose.
- Clean the surface with Hammerite metal degreaser.
- Lightly sand the surface and clean again with degreaser.
- Shake spray can well at least 3 minutes before use.
- Apply at least 3 thin coats and spray in a smooth motion.
- Keep a spraying distance of 25cm.
- Applying another anti-rust primer? Wait at least 15 minutes.
- After 24 hours, the anti-rust spray is repaintable with metal paint, alkyd paint and acrylic paint.
- Tip: never hold the spray can still while spraying, this prevents sags.
- Note: the spray can should be at room temperature.
Features Hammerite Anti rust spray
- Primer spray for bare metal and iron
- Anti rust primer for rusted metal
- Provides a protective primer
- Indoor and outdoor use
- Dust dry after 15 minutes
- Paintable after 30 minutes
- Fully cured after 24 hours
- Yield: 0.5m² per 400ml aerosol can
- Not suitable for non ferrous metal
- Not to be used with professional car paint
| SKU | 5093655 |
|---|---|
| Brand | Hammerite |
| Minimum Coverage m² | 1,5 m² |
| Weight | 400 g |
| Maximum Coverage m² | 2 m² |
| Category | Anti rust spray paint |
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
