2K Putty with aluminium particles
FINIXA GAP50 Putty has aluminum particles. This aluminum filler has been specially developed for filling rough irregularities, pores and holes. Thanks to the aluminum silver particles, it is resistant to high temperatures up to 90 degrees Celsius.
2K Polyester putty for metal & galvanized surfaces
FINIXA GAP50 Aluminum putty is the best 2K putty for filling parts that have to deal with mechanical loads. It adheres perfectly to iron, steel, aluminum, galvanized panels and materials reinforced with fiberglass. In addition, the filler has a very good stability on vertical parts, making this it universally applicable!
Features FINIXA GAP50 Alu Putty
- Polyester putty refined with aluminum particles
- Perfect for use on body parts subject to mechanical stress
- Used to fill coarse irregularities, pores and holes
- Good adhesion on iron, steel, aluminum, galvanized substrates and glass fiber reinforced materials
- Good stability on vertical surfaces
- Can withstand temperatures of more than 90°C
- High elasticity
- Good sandability
Technical specifications FINIXA GAP50 Alu 2K Polyester Putty
- Polyester putty with aluminum particles
- 2% hardener
- Too much or too less use of hardener can have consequences for the end result
- Pot life at 20 degrees Celsius: 3 to 4 minutes
- Can be sanded after 20 minutes (dry or wet)
What is the mixing ratio?
- Mix with 2 to 3% hardener. If in doubt, use a scale during mixing. Too much hardener not only causes too fast hardening but can also lead to detachment through paint.
- Carefully mix the putty with hardener and avoid withdrawing air. Air bubbles result in imperfections during application and sanding.
- Choose the right putty for the right application.
