CROP 2K HS Acrylic Primer Filler WHITE VS1 - 4 liter

CROP 4:1 2K Primer Filler WHITE VS1 4 liter

CROP 4:1 2K Acrylic Primer Filler WHITE VS1 4 liter is a filling primer that adheres strongly to metal, aluminum, galvanized steel, on plastic primer, putty and existing lacquer or paint that is in good condition. Thanks to the large 4 liter can, this High Solid 2K primer is ideal for fully priming a car, van or other large surfaces. This white HS 2K primer filler fills surface imperfections such as small holes, cracks, micro pinholes, sanding scratches and other imperfections. In addition, this primer is fast drying and you can easily sand the primer to a smooth surface. After drying, you can refinish the High Solid primer white with 1K and 2K lacquers or paints that are both thinner- and water-based.

Primer white

Primer white is the best primer to use with both light colors and pearlescent paints, as well as neon and fluorescent paints. This High Solid 2K primer white from CROP has a high filling power so that the surface can be sprayed evenly in the white primer. It is also possible to spray both solid colors and metallic paint. In short, the best 2K primer for light, bright and transparent colors!

Mixing ratio 2K primer

The mixing ratio of the 2K primer is 4:1. This means that to 4 liters of primer, you must add 1 liter of hardener. If desired, you can dilute the primer including hardener 5% to 10% with CROP Universal Thinner for the desired viscosity.

Drying time 2K primer filler

Drying time of 2K primer filler depends on temperature, humidity and layer thickness. Keep the following guidelines concerning the drying time of this 2-component primer filler at 20 degrees Celsius.

• Dust dry: 1 hour
• Hardened: 3 hours
• To sand: 3 hours

Features CROP 2K 4:1 Acrylic Primer WHITE 4 liter

• Professional 2K primer of the best quality
• High-quality primer for the car or other vehicles and surfaces
• Primer with very strong adhesion
• Can be applied over bare material, putty over existing paint and varnish
• Fills irregularities
• Easy to sand primer
• Supplied without hardener and thinner

Technical data CROP HS 2K Primer Filler

• Recommended nozzle openings: 1.5mm, 1.6mm or 1.8mm
• Recommended spraying pressure: 2.5 to 3 bar
• Evaporation time between spray coats: 5 to 10 minutes
• Oven drying time: 30 minutes at 60 degrees Celsius
• Mixing ratio hardener: 4:1
• 5 to 10% dilution can be used
• Shelf life: 1 year