Raptor Liner White 2K Bedliner Coating - 400ml spray can
- 1 unit €31.40
-
12 units
Save 4% ea. €30.14
-
24 units
Save 8% ea. €28.89
- 100 days returns & exchanges
- Customer reviews: 4.36/5 (746 reviews)
Raptor Liner White 2K Bedliner Spray
The white Raptor Liner Bedliner in a 2K spray can is very convenient if you want to apply this finish yourself without the need for a gun and compressor. This 2K white aerosol liner is ideal for small projects, for touching up localized damage, or when you don't have a compressor or gun. The Raptor Liner coating adheres well to most prepared surfaces.
2K white Bedliner Coating
Raptor Liner 2K Bedliner is a performing wear and scratch resistant coating with anti-slip properties in the colour white. This high quality 2K product is also known as a bedliner or load liner and anti-chip liner. This finish provides long-term protection against gravel, scratches, dents, UV rays from the sun and all type of weather influences. The 2K body liner comes with a nozzle that can be adjusted in 3 positions. By changing the spray nozzle setting you can change the texture to your preference. You can choose between fine, medium or rough textures.
How do I apply the white 2k Raptor Liner Bedliner coating?
This Raptor Liner product is easy to use, without the need for special tools. As it is a 2-component spray with hardener, there are only a few things you need to pay attention to. Use the step-by-step plan below to properly apply Raptor Liner 2K Body Liner
- Shake the spray can for 2 minutes.
- Remove the red push button from the aerosol cap.
- Place the red button at the bottom of the can on the stem.
- Press the red button firmly (always press straight down!)
- Shake the can again for 4 minutes so that the 2 components are well mixed.
- Keep a distance of 25 cm between the nozzle and the substrate.
- 2 to 3 coats are sufficient for good coverage.
- Allow the body liner coating to dry for 60 minutes between coats before spraying the next coat
- The coating should dry completely for 24 hours after the last coat.
- Note: Any product remaining in the spray can is also cured after 24 hours.
Features of the Raptor Liner White 2K Bedliner Coating
- White body liner coating
- Also known as a cargo bed liner
- Can also be used as an anti-gravel coating
- Adheres to most surfaces
- Extremely scratch resistant
- Weather and UV resistant
| SKU | RLW/AL |
|---|---|
| Brand | Raptor Liner |
| Minimum Coverage m² | 1,5 m² |
| Weight | 400 g |
| Maximum Coverage m² | 2 m² |
| Category | 2K Car Paint |
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
How many layers of car paint should I apply?
The number of layers of automotive paint you need to apply depends on the coverage of the color. Usually, 3 layers are sufficient. However, for lighter color paints that have less coverage, we recommend applying an additional layer of color until you achieve the desired result.
How long should car paint cure?
The curing time for automotive paint depends on temperature, humidity, and layer thickness. At higher temperatures, the curing process is faster compared to lower temperatures. Additionally, 1K automotive paint dries faster than 2K automotive paint.
What is the drying time for car paint?
The drying time of automotive paint is determined by 3 factors: layer thickness, temperature, and humidity. We recommend monitoring this yourself until the paint is dust-dry. Once this is the case, the paint can be over-sprayed with clear coat or handled!
How long is a 2K spray can usable after activation?
24 hours. After activating the 2K spray can, the two components will mix, starting the curing process, making the spray can usable for 24 hours.
