MIPA 2K EP Primer Filler Grey - 1 Litre

(10)
  £22.58
£22.58 excl. VAT
  1. Complete your purchase
  2. Product information
  3. Specifications
  4. Frequently Asked Questions
  5. Downloads
  6. Product reviews
  7. Comparable products
  8. Blog
  9. Other product categories
Complete your purchase
  • MIPA 2K E10 Hardener for EP-Grundierfiller
    £12.15 £12.15
  • MIPA EP Thinner for MIPA Epoxy Primer 1 liter
    £10.19 £10.19
  • CROP Nitrile Gloves Black - 100 pieces - Extra Strong
    Premium Quality
    (16)
    As low as £11.76 £11.76
  • CROP Half-Face Mask A1P2 + carbon filters & dust filters
    Premium Quality
    (5)
    £21.32 £21.32
  • CROP Sanding Pad grit 220 - 100x120mm
    Premium Quality
    (2)
    £1.84 £1.84
  • CROP Sanding Pad grit 100 - 100x120mm
    Premium Quality
    (1)
    £1.84 £1.84
  • CROP Sanding Pad grit 280 - 100x120mm
    Premium Quality
    (4)
    £1.84 £1.84
  • CROP Paint Mixing Set 33-pieces - Essential Pack
    Premium Quality
    £14.71 £14.71
  • CROP Masking Tape 18mm - per piece
    Premium Quality
    (1)
    £1.33 £1.33
  • CROP Masking Tape 36mm - per piece
    Premium Quality
    (1)
    £2.64 £2.64
  • CROP ScuffX Sanding Fleece UFN Super Fine - Gray
    Premium Quality
    (2)
    £2.94 £2.94
  • CROP ScuffX Sanding Fleece VFN Fine - Red
    Premium Quality
    (2)
    £2.94 £2.94
  • CROP ScuffX Sanding Fleece on roll UFN Super Fine - Gray
    Premium Quality
    (3)
    £21.32 £21.32
  • CROP ScuffX Sanding Fleece on roll VFN Fine - Red
    Premium Quality
    (5)
    £21.32 £21.32
Product information

This 2K Epoxy wash primer provides excellent adhesion to various substrates, even MDF panels. Also this 2K Epoxy wash-primer has good etching qualities on all ferrous metals and light alloys.

Some features of the MIPA 2K Epoxy primer-surfacer:

  • Highly resistant to corrosion (contains anticorrosive pigments)
  • Chromate-free
  • Short drying time
  • Mixing ratio: 2:1 with MIPA E10 Epoxy activator thinner
  • Suitable substrates : Iron and steel, aluminium, sanded galvanized sheet, dried and sanded old paintings.
  • Substrate preparation : Clean, dry, free of dust, rust, oil and grease. Sand and clean with Mipa Silikone Remover.
  • Application process : Mipa EP-Primer-Filler can be applied through brushing, rolling or spraying (Air/Airless)
  • Brushing and rolling: after mixing no dilution is necessary
  • Wait 15 min. after the mixing of the two components before use.

SL-Primer

Specifications
SKU 227510000
Brand MIPA
Minimum Coverage m² 3,5 m²
Weight 1 kg
Maximum Coverage m² 5 m²
Category Primers
All specifications
Frequently Asked Questions

Do you need to sand primer

Once the primer is dry, you need to sand it. Sanding the primer smooths the surface and lightly roughens the primer layer. This helps the color car paint or 2K paint adhere better to the primer. If you don’t sand the primer, the paint will not adhere as well to the base coat.

Downloads
Product reviews
5/5
Based on 10 reviews
Good Epoxy
I used this epoxy for some axles on a trailer.
You do have to be careful that it is hot enough to handle but otherwise it worked fine
Richard Delicaat |
Translated from Dutch
First
Very good to spray and treat.
Ollie |
Translated from Dutch
MIPA 2K Epoxy Primer
Very fine product, with 5% dilution it is fine to use for spot repair, spray with a small paint sprayer with 1.0 mm needle under 2 bar fine, 2 coats gives already a good coverage, also it cures quickly and tight. In other words with this it should certainly work if you want to spray a good primer, soon another job and will certainly order 1 liter again.
Kees |
Translated from Dutch
Blog