2K Epoxy Primer SprayMax aerosol
2K Epoxy Primer SprayMax aerosol offers metal surfaces the best protection against rust and corrosion. In addition to rust protection, this SprayMax 2K Epoxy Primer spray provides an excellent bonding layer of automotive paint! SprayMax 2K Epoxy Filler Primer aerosol can is a universally applicable primer for adhesion of car paint on all substrates such as metal, mdf, non-ferrous metals, galvanized substrates and anodized aluminum substrates. This SprayMax 2K epoxy primer is available in the colors Gray, Beige and Black.
SprayMax 2K Epoxy Primer spray
SprayMax 2K Epoxy Primer spray has good filling properties thanks to its 2-components. Unevenness and holes in the surface will be filled and the surface can be sanded smooth. This 2K Epoxy Primer SprayMax aerosol is filled in a professional aerosol can. SprayMax spray cans are known for their fantastic atomization that provide a sleek and smooth professional end result.
Features of the 2K Epoxy Primer SprayMax aerosol
- Excellent adhesion and anti-corrosion properties; also on problem substrates such as aluminum and MDF panels.
- Also for on MDF panels
- Good etching properties on all ferrous metals and light alloys
- Highly corrosion resistant (contains anti-corrosion pigments)
- Short drying time
- Shelf life after mixing with hardener is approx. 4 days at 20°C
- Can be filled with 2K polyester materials.
- Good insulating properties.
- Chromate-free
- Recoatable after approx. 20 minutes with all one-pack basecoats and two-pack paints
SprayMax 2K Epoxy Primer can be sprayed on
SprayMax 2-component spray can Epoxy Primer is known for its many applications on almost all substrates. This 2K filler can be sprayed on the following substrates.
- Bare steel
- Galvanized steel
- Aluminium
- Cured 2K fillers
- Old paint layers
How does the 2-component SprayMax Epoxy Primer work?
For best adhesion and application of this SprayMax 2-component primer, we advise you to perform the following steps first. We also like to explain how a 2-component spray can works. This will ensure the best adhesion and processing of the 2K filler.
- Derust the damaged area and clean it thoroughly with SprayMax Silicone Remover in spray can, so that the parts to be treated are free of grease and dust.
- Before starting, shake the 2K aerosol can well for 3 minutes. Next, remove the red push button from the cap and place it squarely on the pin at the bottom of the 2-component spray can. Then press it vigorously and again shake the aerosol can for 3 minutes to allow both components to mix and start the hardening process. After mixing the two components, the prepared 2K lacquer has a shelf life of 24 hours. Depending on environmental factors (temperature) this may be longer or shorter.
How do I spray the 2-component Epoxy Filler?
After activating the two-components, we recommend following the guidelines below to properly spray this two-component primer.
- Spraying distance: 10 to 15 cm
- Number of layers: 2 (approx. 70 μm)
- Evaporation time between layers: 5 to 10 minutes
- Dust-dry: 15 minutes at 20°C
- Can be handled: 5 hours at 20°C
- Sandable: 12 hours at 20°C or 30 minutes at 60°C object temperature.
- After drying recoatable with standard one-pack or two-pack acrylic paints
- If the 2K Epoxy Primer is oversprayed only after 3 days, the primer should be lightly sanded.
- The 2K Epoxy Primer is fillable with a 2K putty or 2K Spray putty after 12 hours / 20°C or 30 minutes at 60°C object temperature.
- For wet-on-wet application: with all 1K Basecoats and 2K Topcoat Systems after 25-30 min drying at 20°C or after 15-20 min with infrared drying.
Processing time:
- Approximately 96 hours at 20°C
A few more tips for you at a glance:
- Wear personal protective equipment (respiratory protection Type: A2/P2, safety gloves such as e.g. latex or nitrile)
- After spraying, we recommend that you turn the spray can upside down and empty the built-in suction tube.
a
