CROP 2K Clear Coat Spray High Gloss 400ml - Professional
- 1 unit €14.88
-
6 units
Save 7% ea. €13.84
-
12 units
Save 13% ea. €12.95
-
18 units
Save 22% ea. €11.61
-
24 units
Save 23% ea. €11.46
- 100 days returns & exchanges
- Customer reviews: 4.38/5 (723 reviews)
CROP 2K High Gloss Clear Coat Spray 400ml
CROP 2K Clear Coat Spray High Gloss is a clear transparent hard protective film for car paint. Use this professional clear coat varnish in a 2-component aerosol with hardener for a scratch-, petrol-, chemical and UV-resistant finish. The high quality CROP 2K Clear Coat spray provides a very high gloss effect with depth and reflection that you can also polish incredibly well!
2K clear varnish for all types of paint
Do you want to give your paint layer maximum protection with a 2K clear coat? You can apply CROP high gloss 2K clear coat over both water-based and conventional thinner-based lacquers. Can be used on solid, metallic or pearl paint. The transparent film provides the best protection against all weather influences, scratches, impacts and mechanical stress. Because the 2K clear lacquer aerosol is UV-resistant, the clear coat won't yellow.
Spray high gloss 2K clear coat
You can easily spray high gloss 2K clear varnish in a few simple steps. Follow the guidelines below.
- Before spraying clear coat, the surface must be free of dust and grease. Clean the surface with a tack cloth.
- Shake well before use (approximately 2 minutes).
- Remove the red button from the cap and place it straight (!) on the pin at the bottom valve.
- Press the red button firmly and vigorously (be careful not to hear a hissing sound), to break the seal between the hardener and varnish.
- Shake the spray can again for 2 minutes.
- Spray a thin mist coat, followed by 2 to 3 coats of clearcoat with a spraying distance of 20 to 30cm. Keep a 3 to 5 minute pause between coats.
- After the last coat, let the clear coat dry for at least 12 hours at 20°C.
- Done? The hardener in the clear coat spray has a pot life of 6 hours.
Polish 2K clear coat spray
Do you want to polish 2K clear coat to remove orange peel? Polishing 2K clear coat can be done after 24 hours at 20°C. Then the 2 component clear coat is fully cured. If desired, you can first sand the 2K clear coat with waterproof sandpaper P2000 or P3000.
Features CROP 2K Clear Coat Spray High Gloss
- Professional 2K clear coat
- Best 2K acrylic clearcoat
- Unprecedented high gloss effect (100% gloss level)
- Beautiful spray pattern
- Very high depth and reflection
- Scratch resistant
- Chemical-resistant
- Resistant to all weather influences
- Clear varnish with UV protection
- Transparent varnish (does not affect the color)
- Non yellowing
- Fast drying
- Good to polish
- After activation, the aerosol has a pot life of 6 hours
- Drying time:
- Dust dry after 10 to 15 minutes at 20°C
- Touch dry after 4 hours at 20°C
- Polishable after 8 hours at 20°C
- Fully cured after 24 hours at 20°C
- Best 2K clear coat spray
- Very high gloss level
- Professional spray pattern
- Very good polishable
- Only available in a 400ml spray
| SKU | 2767-0102 |
|---|---|
| Brand | CROP |
| Weight | 400 g |
| Maximum Coverage m² | 2 m² |
| Minimum Coverage m² | 1.5 m² |
| Category | Spray Paints |
How long is the shelf life of clear varnish?
What is 2K Clearcoat?
How do you apply 2K Clear Varnish?
What is the difference between 1K and 2K clear coat?
Which 2K lacquer is best?
What is clear coat?
Clear coat is a transparent lacquer that you apply over a colour lacquer. This makes a clear coat the same as a varnish that protects the colour lacquer from scratches, discolouration by sunlight, impacts, weather, salt and more.
How do you apply clear coat?
What is the difference between clear coat and transparent?
How many layers of clear coat should I apply?
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
How long is a 2K spray can usable after activation?
24 hours. After activating the 2K spray can, the two components will mix, starting the curing process, making the spray can usable for 24 hours.
