PPG 1K Plastic Adhesion Promoter
PPG Plastic Primer Can
PPG D820 Plastic Adhesion Promoter is a fast, transparent 1 pack primer suitable for use on the vast majority if paintable plastic substrates and avoids the need to identify the plastic prior to spraying.
Plastic primer for plastic substrates
Thorough preparation and cleaning are essential for the successful refinishing of plastic parts. The PPG plastic cleaning and preparation system is designed to produce the best performance from the adhesion promoter, undercoat and topcoat systems.
How do I prepare the plastic surface?
Sanding is recommended before spraying the plastic adhesion promoter. Sand the surface with P320 - P400 (dry). Prior and after any sanding operation, the substrate must be thoroughly degreased.
Flash off time PPG Plastic Primer
The drying time of PPG Plastic Primer depends on various factors such as paint layer thickness, temperature and humidity. PPG plastic promoter is fully cured at 20°C after 30 minutes.
Features PPG Adhesion Promoter
- Ready for use
- No thinning required
- Stir tin thoroughly before use
Technical Data PPG D820 Plastic Adhesion Promoter
- Spraygun nozzle: 1,3mm - 1,6mm
- Number of coats: 2
- Flash off at 20°C between coats: 5 to 10 minutes
- Flash off at 20°C before topcoating: 30 to 40 minutes