MoTip Wheel Spray Paint BLACK GLOSS - 500ml
MoTip Wheel Spray Paint GLOSS BLACK
MoTip Wheel Spray Paint GLOSS BLACK is a fast drying acrylic lacquer with a lasting gloss. This gloss black spray paint offers good coverage, excellent adhesion and good surface hardness. The MoTip Wheel Spray Paint in black high gloss is specially made to renew and repair steel or other light metal rims and hubcaps of your car. The high gloss black wheel spray paint is resistant to scratches, petrol, chemicals, the weather and is UV-resistant. For the best result we advise to use a 2K clear coat as a varnish.
How to paint rims black
Always wondered how to paint rims black? In just a few simple steps you can use this gloss black spray paint for wheels to give the rims a new black color!
- Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of MOTIP primer suitable for the surface. After drying, sand the base layer (grain 600).
- Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.
- Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30cm.
- Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
- In order to obtain high gloss, apply a finishing coat of 2K clear coat.
- After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
- The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
Features MoTip Wheel Spray Paint BLACK GLOSS
- Non-fading and UV-resistant
- Fast drying
- Good coverage
- Resistant to petrol, chemicals and weather influences
- Good surface hardness
- Lasting gloss
- Wear-resistant and scratch free
- Excellent adhesion
| SKU | M04018 |
|---|---|
| Brand | MoTip |
| Minimum Coverage m² | 1.5 m² |
| Weight | 500 g |
| Maximum Coverage m² | 2.5 m² |
| Category | Wheel Paint |
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
