MoTip Removeable Coating transparent - aerosol 500ml
- 1 unit €10.56
-
6 units
Save 1% ea. €10.45
-
12 units
Save 3% ea. €10.24
- 100 days returns & exchanges
- Customer reviews: 4.38/5 (723 reviews)
MoTip transparent Removeable Coating in spray can
MoTip Removeable Coating is a removable glossy transparent film that can be sprayed on to temporarily re-colour car body parts, spoilers, wheel rims, mirror caps or other surfaces. Do you want to return to the original colour? Then the transparent MoTip film is easy to remove, simply by peeling it off.
MoTip glossy transparent film in spray can
MoTip's transparent Removeable Coating is packaged in a 500ml aerosol can with high coverage. The can has a spray nozzle that you can rotate 360 degrees. This means that you always have the right spray angle. Thanks to the high quality, you can easily remove the MoTip film whenever you want. Removeable Coating adheres to most materials and surfaces such as metals, aluminium, iron, steel, plastic, glass and wood. We do not recommend using this product on 1K paint.
How do I apply the transparent film?
MoTip's Removeable Coating is a bright transparent film that is easy to spray onto various surfaces. In a few simple steps, you can spray MoTip's Removeable Coating yourself to achieve a beautiful glossy transparent finish.
- Before you start applying the film, it is important that the surface you are going to spray on is clean, dry and free of grease. Use a good degreaser for this.
- As this is a removable finish, you do not need to apply a primer.
- Make sure the spray can is at room temperature. The substrate and environment should also be between 10°C and 25°C. This allows the product to flow properly.
- Shake the can well for 3 minutes.
- Always spray a sample before starting to see if it has the desired effect.
- Keep a distance of 25-30 cm between the nozzle and the surface while spraying.
- Apply at least 5 coats with a 5 minute evaporation break at 20°C.
- To prevent the MoTip film from cracking during shrinkage, apply an extra coat in critical areas. For example corners, edges and curves.
- After the last coat, the whole thing must be allowed to dry thoroughly. The curing time depends on the thickness, humidity and ambient temperature.
Features of the MoTip Removeable Coating transparent film
- Glossy transparent finish
- Clear transparent colour
- Weather resistant
- Fast drying coating
- Easy to remove coating
- Excellent adhesion to most surfaces (except 1K paint)
- Easy to apply
- Resistant up to 100°C
- Drying time:
- Dust free: 20 min at 20°C
- Manageable: 30 minutes at 20°C
- Completely dry: after approx. 1 hour at 20°C
| SKU | 04307MOTIP |
|---|---|
| Brand | MoTip |
| EAN | 8711347245147 |
| Components | 1K (1-component) |
| Minimum Coverage m² | 3 m² |
| Category | Plastic Dip |
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
