Set of 4 tyre masking devices for painting rims

Masking covers for painting rims

This is a set of 4 tyre masking devices that allow the painting of rims while protecting the rest of the wheel. With this specialised masking cover you do not need to remove the tyre from the rim if you want to spray the rim. The masking device has an elastic band that you pull around the rim so that it fits perfectly around the wheel. This set contains 4 plastic covers for 4 wheels.

Spray rims up to 22 inches 

This professional wheel masking device can be used to spray rims up to 22" in diameter. Thanks to the adapted size, it completely covers the car tyre so that no paint drops or spray mist get on the tyre. In the middle of the masking cover is an elastic band that you pull around the wheel. Thanks to its high elasticity, the cover film is suitable for large rims up to 22 inches.

How do I spray the rims with this masking device?

You want to spray your rims with these masking devices by covering the car tyres. In a few simple steps you can mask the tyres for spraying and you don't need to remove the tyre from the rim!

1. Before you start mounting the masking device, you must let the air out of the tyre.
2. Slightly loosen the tyre from the rim.
3. Make sure the wheel is clean and dry.
4. Adjust the masking film around the rim with the elastic band.
5. Start spraying the rim.
6. After drying, you can easily remove the masking device.
7. Re-inflate the tyre.

Features of the set of 4 masking devices for rims

• Special masking device for spraying rims
• Suitable for rims between 15 and 22 inches
• With elastic band in the middle
• Adheres to the paint
• Supplied in a set of 4 covers
• Maximum inner diameter: 58 cm
• Temperature resistant up to 80°C