MoTip Fluor YELLOW Spray Paint
MoTip Fluor YELLOW Spray Paint is a decorative, fluorescent acrylic paint for treated and untreated surfaces including wood, metal, aluminium, stone and various types of plastic. This yellow fluorescent spray paint has a fast drying and excellent adhesion. For the best results, our advise is to first apply a base layer of MoTip White Primer.
How to use yellow fluor spray paint
Always wondered how to use yellow fluor spray paint? In just a few simple steps you can use this fluorescent lacquer in yellow color.
- Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. In order to achieve the best fluorescent effect, apply a layer of white MoTip primer. When treating surfaces of plastic, first apply a layer of plastic primer before applying the MoTip white primer. After drying, sand the base layer (grain 600).
- Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.
- Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated 10 to 12cm.
- Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
- After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
- The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
- Recommendation: In order to improve the resistance to UV and weather influences, apply a finishing coat of MOTIP acrylic clear varnish.
Features MoTip Fluor YELLOW spray
- Fast drying
- Fluorescent
- Excellent adhesion
- Bright yellow color
- Use a clear coat for maximum protection
