MoTip Fluor Spray Paint 400ml - RED

MoTip Fluor RED Spray Paint

MoTip Fluor RED Spray Paint is a decorative, fluorescent acrylic paint for treated and untreated surfaces including wood, metal, aluminium, stone and various types of plastic. This red fluorescent spray paint has a fast drying and excellent adhesion. For the best results, our advise is to first apply a base layer of MoTip White Primer.

How to use red fluor spray paint

Always wondered how to use red fluor spray paint? In just a few simple steps you can use this fluorescent lacquer in red color.

1. Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. In order to achieve the best fluorescent effect, apply a layer of white MoTip primer. When treating surfaces of plastic, first apply a layer of plastic primer before applying the MoTip white primer. After drying, sand the base layer (grain 600).
2. Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.
3. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated 10 to 12cm.
4. Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
5. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
6. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
7. Recommendation: In order to improve the resistance to UV and weather influences, apply a finishing coat of MOTIP acrylic clear varnish.

Features MoTip Fluor RED spray

• Fast drying
• Fluorescent
• Excellent adhesion
• Bright red color
• Use a clear coat for maximum protection