FINIXA Anti Gravel in 400ml Aerosol

High quality protection for the bottom and visible body parts of vehicles. Anti gravel, deliverable in light grey and black, supplied with a round thick spray jet to apply the viscous product in thicker layers. To become a composition of layers: apply crosswise layers at a distance of 35 cm, shortening the distance means a more glossy result, can be paint with all 1 and 2 K paints.

Product Features

• Sprayable with all paint systems
• Permanently elastic
• Very good adhesion
• Weather resistant
• Resistant to weak acids and bases
• Excellent corrosion prevention
• Silencing

Features

• Colour : grey/black
• Solids : 30-32% DIN 53216
• Density (20°C) : 0.804 kg/L DIN 51757
• Flash point : -7 °C ASTM D 1310-67
• Drying time : 2-3 hours
• Saltspray test : > 200 hours DIN 50021

Application

1. Before use, read the instructions on the package and follow them.
2. Remove loose old paint and rust and sand the surface.
3. The surface must be clean, dry and free of grease.
4. The aerosol at room temperature.
5. Processing temperature 15 to 25 ° C.
6. Before use, shake the aerosol for 2 minutes and spray a sample.
7. Distance to the surface approximately 25 to 30 centimetres treat
8. Apply Anti-Crushed in several layers.
9. After drying, without sanding sprayable with all paint systems.
10. After using, clean the valve (spray can upside down and press the nozzle for approximately 5 seconds).
11. The drying time depends on the ambient temperature, humidity and film thickness.
12. Do not spray on the engine, brakes and the exhaust