PPG 2K Matt Clearcoat

PPG 2K Matt Clearcoat

PPG 2K Matt Clearcoat is a versatile 2K acrylic urethane clearcoat designed to reproduce a range of low gloss level for the specialised repairs of vehicles or areas of vehicles originally finished with a low gloss clearcoat over a single or multistage colour basecoat system.

Automotive Matte Clear Coat

PPG 2K matte clearcoat is used by OEM car manufacturers such as Lamborghini, Mercedes and BMW. PPG 2-component clearcoat matt ensures high quality for factory original appearance and refinishing.

Mix of Semi Gloss and Matt Clear Coat

PPG D8115 / D8117 or mixes of the two may be used over rigid plastics without the need for special additives.

• Lamborghini - Matt Clearcoat
  • PPG D8115 Clearcoat Matt: 100%
  • PPG D8117 Satin gloss clearcoat: 0%
• Mercedes - Matt Clearcoat
  • PPG D8115 Clearcoat Matt: 50%
  • PPG D8117 Satin gloss clearcoat: 50%
• BMW - Matt Clearcoat
  • PPG D8115 Clearcoat Matt: 30%
  • PPG D8117 Satin gloss clearcoat: 70%

To allow for normal variations in the gloss level, depending on colour, model, position of repair on vehicle, it is possible to mix the D8115 and D8117 together in any ratio to match the required gloss for a particular repair. The % ratio’s quoted below are the best start point for the 5 gloss level ranges.

Flash off time PPG Matt Clearcoat

The drying time of PPG Clearcoat depends on various factors such as paint layer thickness, temperature and humidity.

• At 20°C
  • Dust-free: 60 minutes
  • Sandable: 4 hours
  • Through dry: 24 hours
• At 60°C
  • Through dry: 30 to 35 minutes
• Through dry with IR
  • 8 to 15 minutes

Features PPG 2K Matte Clear Varnish Can

• Matte clearcoat
• High coverage
• Works with any basecoat and 1K car paint
• Can be mixed with stin gloss clear varnish
• Use PPG D8238 activator/catalyst
• Mixing ratio is 3:1
• Can be diluted with PPG Thinner D807 (Mixing ratio: 1,5)
• Shake well before use

Technical Data PPG D8115 2K Clearcoat Matt

• Spray-gun nozzle: 1,2mm - 1,4mm
• Number of coats: 1 single coat + a second thin layer
• Flash off time: should be fully dried
• Spray viscosity at 20°C: 15 secondes DIN4
• Potlife at 20°C: 1 to 2 hours (depends on activator and thinner)

PPG Activator & Thinner

This product must always be used with the corresponding paint hardener and thinner. The mixing ratio of activator and thinner with PPG 2K Clearcoat Matte is 3:1:1,5.