MOTIP DUPLI-COLOR Rust Effect in 400ml Aerosol

Quality and properties

• High-quality special paint
• Special, rough texture
• Very good coverage
• Excellent adherence
• Quick-drying
• Suitable for indoors and outdoors applications
• Excellent colour retention: weather-resistant, light-proof, UV-resistant
• Can be recoated well

Physical and chemical properties

• Basis of the binder: special lacquer on nitro-combi basis
• Colour: rust-brown
• Smell: solvent
• Degree of gloss (at measurement angle 60° acc. to DIN 67530):
  not applicable due to special structure
• Efficiency:
  Depending on consistence and color of the ground:
  400 ml are sufficient for approx. 1.5 m²
  150 ml are sufficient for approx. 0.5 - 0.6 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Non-sticky: after approx. 15 minutes
  Dry to touch: after 50 minutes
  Can be coated with rust-effect spray at any time; with other top coats after approx. 3 hours.
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant: up to 80°C
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  
• Size: aerosol cans with maximum nominal volume 400 ml

Application

Preparation of the ground:

• Carefully remove loose parts of old paintings and rust.
• Then sand and remove dust.
• The ground has to be clean, dry and free from fat.
• Apply a primer, if necessary, e.g. DUPLI-COLOR Universal Primer
• Prepare coatable hard plastics with DUPLI-COLOR Plastic Primer
• You can create individual effects by priming selective areas with orange or black paint.

Lacquering:

• Cover areas not to be painted.
• Before use, shake the can for 2-3 minutes.
• Test spray to check colour-matching and compatibility at an invisible spot.
• Spray several thin coats in 2 minute intervals.
• Spray from a distance of approx. 25 cm.
• Best results will be achieved at temperatures around 20°C.
• Do not spray over synthetic paints.

Tips for spraying

Protect the object and the surrounding area from aerosol mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!