MOTIP DUPLI-COLOR Milk Glass Effect in 150ml Aerosol
- 100 days returns & exchanges
- Customer reviews: 4.26/5 (857 reviews)
Quality and properties
- High-grade, white-transparent acrylic lacquer
- Quick-drying
- Very efficient
- Transparent (translucent)
- Matt
- After drying (24 hours) heat-resistant up to 90°C
- The painting is insensitive to water and window cleansing agents
- Can be removed easily with alcohol or solvent
- It is possible to take off the paint from even surfaces with a plastic scraper
Physical and chemical properties
- Basis: acrylate co-polymeres
- Colour: white-matt-transparent
- Smell: solvent
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
matt, not measurable due to structured surface - Efficiency:
Depending on consistence and color of the ground:
150 ml are sufficient for approx. 1.0 - 2.0 m² - Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 5 minutes
Non-sticky: after approx. 10 minutes
Dry to touch: after approx. 30 minutes
Cured: after approx. 24 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. - Temperature-resistant: up to 90°C
- Storage stability:
10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size: aerosol cans, maximum nominal volume 150 ml
Using instructions
The most DUPLI-COLOR aerosols have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!
Application
Preparation:
- The surface must be clean, absolutely fat-free and dry.
- Cover the surfaces not to be lacquered.
Lacquering:
- Shake can for 3 minutes, test spray.
- The optimal distance is approx. 25 cm.
- Spray several thin coats.
- Do not spray on surfaces lacquered with synthetic paint!
- To improve scratch-resistance it is possible to apply a coat of DUPLI-COLOR Zapon Aerosol. Please consider, that by this the effect becomes more translucent!
Tips for spraying
Protect the object and the surrounding area from aerosol mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
| SKU | M263231 |
|---|---|
| Brand | MoTip |
| Minimum Coverage m² | 0.6 m² |
| Weight | 400 g |
| Maximum Coverage m² | 0.8 m² |
| Category | Custom Car Paint |
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
