MOTIP Anti Stone Chip in aerosol is a sprayable preservative against chippings to treat the underside and visible parts of motor vehicles. Stone chip spray is re-sprayable with all lacquer systems and has an excellent rust prevention. Stone chip spray is resistant to weather influences and weak acids and bases, is sound-absorbing and remains flexible. MOTIP Anti Stone Chip is available in three colours, black, grey and white.
The following colors may show for technical reasons on each screen differently . They serve only as indications and therefore cannot be legally binding.
High quality protection for the bottom and visible body parts of vehicles.
Product Features
- Re-sprayable with all lacquer systems
- Remains flexible
- Very good adhesion
- Resistant to weather influences
- Resistant to weak acids and bases
- Excellent corrosion prevention
- Sound-absorbing High solid content
- Contents: 1.000 ml
- VOC-content: Approximately 33% w/w
- Coverage: 2 to 3 m²
- Dust dry: After approximately 30 minutes
- Tack free: After approximately 60 minutes
- Re-sprayable: After 2 hours
Usage
- Before use, carefully read the directions on the packaging and act accordingly.
- Remove loose old lacquer and rust and sand the surface.
- The surface should be clean, dry and free of grease.
- The can should have room temperature.
- Best processing temperature 15 to 25°C.
- Before use, shake the can.
- Working pressure 4 to 5 bar.
- Apply the Stone Chip Spray in the desired layer thickness.
- After drying, without sanding, re-sprayable with all lacquer systems.
- After use, clean the spray-gun with white spirit.
- The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
