MIPA Winner High Gloss Clear Coat aerosol 400ml
- 1 unit €5.14
-
6 units
Save 1% ea. €5.09
-
12 units
Save 2% ea. €5.04
-
18 units
Save 4% ea. €4.93
-
24 units
Save 5% ea. €4.88
- 100 days returns & exchanges
- Customer reviews: 4.39/5 (739 reviews)
MIPA Winner 1K High Gloss Clear Coat
MIPA Winner 1K high gloss clear coat is suitable for application over existing and newly sprayed paint. It is a beautiful glossy finish for a protected surface that remains 100% colourfast. Thanks to its high quality, Winner varnish offers maximum protection for the paint. This varnish is well known for its easy and fast application.
Spray varnish
The varnish is a transparent protective spray coating that is suitable for protecting the paint against UV radiation from the rays of the sun, scratches, discolouration, fuel and weather influences. Winner is a fast-drying acrylic varnish which is completely dry after 2 hours (at 20°C). This product offers a durable protection to the surface.
How to apply the spray varnish?
Winner from MIPA is a clear varnish that is easy to apply. Follow the step-by-step instructions below.
- Shake the can well before use.
- Use at a temperature between 15 and 25°C.
- Maintain a spray distance of 20-30 cm from the surface.
- Spray 2 to 3 coats of clear coat.
- Allow 5 minutes of evaporation time between coats.
- After the last coat, you must allow the clear coat to harden.
- Finished spraying? Turn the can upside down and press the nozzle until only the propellant comes out. Now the nozzle is clean and you can store the remaining varnish.
Features of MIPA Winner High Gloss Clearcoat
- High gloss varnish
- High-quality varnish in a practical aerosol can
- Fast drying varnish
- Scratch resistant
- UV resistant
- No yellowing
- Rust protection
- Can be used on solvent and water based paints
- Easy to apply
- Drying times of the MIPA Winner varnish
- Dust free: 10 min at 20°C
- Manageable: 30 minutes at 20°C
- Completely dry: 2 hours at 20°C
- Provides increased protection to paint
- Clear colourless
- Scratch resistant
- Does not yellow
- Not resistant against fuels
| SKU | 216011700 |
|---|---|
| Brand | MIPA |
| Minimum Coverage m² | 1,5 m² |
| Weight | 400 g |
| Maximum Coverage m² | 2 m² |
| Category | Clear Coat Spray |
How long is the shelf life of clear varnish?
What is clear coat?
Clear coat is a transparent lacquer that you apply over a colour lacquer. This makes a clear coat the same as a varnish that protects the colour lacquer from scratches, discolouration by sunlight, impacts, weather, salt and more.
How do you apply clear coat?
What is the difference between clear coat and transparent?
How many layers of clear coat should I apply?
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
