MIPA Epoxy Primer spray 400ml
- Primer with protection against rust
- Etch primer
- Excellent adhesion
- Easy to sand
- Not suitable as a plastic primer
MIPA Epoxy Primer spray
MIPA Epoxy Primer spray is a chromate-free epoxy resin based one-component primer surfacer with excellent filling properties. This epoxy primer spray is perfectly suitable as anti-corrosion coating. Furthermore, it offers a high insulating effect against humidity impacts. Applicable on sanded intact old paint work and shop primers or directly on steel, aluminium and zinced substrates. MIPA Epoxy Primer Spray provides a fast drying and excellent sandability. The very fine spray- ing allows the product to be applied on the spot repair area without leaving coarse overspray spots in the transition zone. The time for intermediate sanding is therefore reduced significantly.
How to use epoxy primer
- Shake can vigourously before use
- Spray to test - Spraying distance approx. 20 - 30cm
- 3 - 5 minutes between each coating
- Turn can upside down and spray until the valve is clean, this prevents the valve from clogging up
Features MIPA Epoxy Primer spray
- Fast drying
- Excellent sandability
- Very high filling properties
- Resistent to silicone remover
- Excellent corrosion protection
- Outstanding adhesion
- Very high insulating effect against moisture
- Very low spray mist and overspray in the fade-out zone
- Overcoatable with all solvent- or water-based 1- or 2-component topcoats
- Drying times (approx):
- Dust dry after 5 minuten
- Re-coatable after 30 minuten
- Sandable after 30 minuten
-
Epoxy Primer SprayMax aerosol€13.01 €10.75 Retail price €25.35
-
2K Epoxy Primer SprayMax aerosol€18.76 €15.50 Retail price €34.30
-
Colormatic 1K Epoxy Primer in Aerosol€13.35 €11.03 Retail price €26.73
-
PPG 2K Epoxy Primer 400ml€28.94 €23.92 Retail price €42.88