MIPA 2K Clear Coat Scratch Resistant - High Solid
- 100 days returns & exchanges
- Customer reviews: 4.39/5 (733 reviews)
Scratch Resistant 2K clear coat
MIPA 2K HS clear coat is a scratch resistant High Solid clear coat with high scratch resistance.... This 2-component clear coat gives an ultimate high gloss and is characterized by its high scratch resistance and UV protection. This special scratch-resistant clear coat is resistant to scratches caused by car washes and chemicals, among other things. This makes the MIPA 2K-HS clearcoat CS90 particularly suitable for spraying cars, motorcycles, commercial vehicles, campers, caravans or for smaller spot repair paint repairs.
2-component clearcoat that does not yellow
Besides being a scratch repair clearcoat, MIPA CS90 clearcoat also contains high UV protection. Thanks to the high UV protective components, the clear coat does not yellow and retains its bright high gloss. Even in the long term!
How the MIPA 2K CS90 clear coat came about
No car is immune from small scratches in the paintwork caused by car washes, stone chips and other mischief. They mar the bodywork. MIPA tackles this evil with MIPA CS90. This is an ultra scratch-resistant clearcoat, which retains its optimum gloss for a long time. Scratch-resistant clearcoat from MIPA is being offered by more and more car manufacturers as an option on their luxury models. To enable bodyshops to provide the same quality in repairs, MIPA developed the CS90 clearcoat.
Drying times of the MIPA 2-component scratch-resistant clearcoat
The scratch-resistant clearcoat can be used for both spot repairs and complete car refinishing. It is applied in two coats with an intermediate drying time. MIPA CS90 dries at a low temperature of 60 degrees Celsius. Only two coats are applied, with 3 minutes of intermediate evaporation, just like our standard clearcoats.
- MIPA CS90 can be used to repair minor damage to any part of the vehicle.
- MIPA CS90 can be dried at 60°C or dried with an infrared dryer, and then easily refinished and polished if necessary.
Features of the MIPA scratch resistant clear coat
- Ultimate and deep high gloss
- Easy to spray clearcoat
- Suitable for any refinishing and/or repair
- Factory original
- The lacquer delivers a hard and durable finish of factory quality
- Can be sprayed on both water-based and conventional automotive paints
- Consumption: 6 to 8 m² per liter
- Mixing ratio: 2:1
- Dilution: 15 to 20%
How do I use the scratch resistant 2K clear coat?
MIPA 2K scratch resistant clear coat is a very easy to spray 2-component clear coat. As the name says, this is a lacquer that consists of 2 components. It is necessary to add MIPA 2K HS Hardener to the clear coat. The mixing ratio is 2:1. This means that to 1 liter of clear coat, half a liter of hardener must be added. If desired, you can dilute the 2K clear coat 15 to 20% with MIPA 2K Thinner.
Available in 3 packages
The MIPA CS 2K Clear Coat is available in 3 packages. Depending on your spraying job, choose the desired amount.
- MIPA CS85: 0.5 liters
- MIPA CS90: 1 liter
- MIPA CS90: 5 liters
| SKU | conf_MIPA-2K-CS |
|---|---|
| Brand | MIPA |
| Components | 2K (2-component) |
| Gloss level | (High) Gloss |
| Packing | 1 piece |
| Category | Car Paint |
How long is the shelf life of clear varnish?
How do you apply clear varnish?
Which varnish is best?
How many coats of clearcoat should I apply?
How much time between coats of clear coat?
What is the difference between clear varnish and coloured varnish?
What is clear coat?
Clear coat is a transparent lacquer that you apply over a colour lacquer. This makes a clear coat the same as a varnish that protects the colour lacquer from scratches, discolouration by sunlight, impacts, weather, salt and more.
How do you apply clear coat?
What is the difference between clear coat and transparent?
How many layers of clear coat should I apply?
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
Recommended to dilute well so it flows better.
