CROP 2K Epoxy Primer
CROP 2K Epoxy Primer Black is a high-quality, two-component corrosion resistant sealer with excellent adhesion to metal, fibreglass and aluminum surfaces. 2K Epoxy primer spray paint improves adhesion of body fillers and resists moisture damage caused by water permeation. It is recoatable with all standard solvent or waterborne 1K and 2K paints.
Epoxy Primer 2K spray paint
CROP epoxy primer 2K spray can consists of two components; primer and activator. By "activating" the aerosol with the red button, the hardener is mixed with the base coat. Therefore, 2K epoxy primer is chemical-resistant, corrosion-resistant and has excellent adhesion on a variety of properly prepared surfaces.
Spray 2K epoxy primer paint
How do I spray 2K epoxy automotive primer? Please follow the instructions below.
- Before spraying the epoxy primer, surfaces should be clean, dry and sanded.
- Shake well before use (approximately 2 minutes).
- Simply take the red button from the cap and attach it to the pin on the bottom of the can.
- Put the top of the can on stable ground and push the red button firmly and press the pin into the can.
- Shake again for two minutes to ensure activator is thoroughly mixed with clearcoat.
- Spray 2 to 3 coats of primer with a spray distance of 20 to 30 cm. Take a 10 to 15 minute flash time between coats.
- After the final coat, allow the primer to dry for at least 12 hours at 20°C.
- After activated, this product has a pot life of 6 hours.
Features CROP 2K Epoxy Primer Black
- Professional 2K epoxy primer
- Best 2K epoxy automotive primer
- Excellent spray pattern
- Very strong adhesion
- Rust and corrosion resistant
- Chemical resistant
- Solvent resistant
- High coverage
- Resists moisture
- Recoatable with 1K and 2K paint
- After activated, the primer has a shelf life of 6 hours
- Drying time:
- Dust dry after 10 to 20 minutes at 20°C
- Dry to the touch after 5 hours at 20°C
- Recoatable after 50 minutes at 20°C
