TECTYL Multipurpose Amber

TECTYL Multi Purpose Amber in Aerosol

Tectyl Multipurpose Amber is a wax based, solvent cutback, amber colored corrosion preventive. It has good water displacing and penetration properties, making it very suitable as a versatile corrosion protective for a wide variety of applications: Automotive, Marine, Household and industrial.

Surface preparation

The maximum performance of Tectyl Multipurpose (MP) Amber can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale and a substrate temperature of 10-35 °C at the time of product application. 

Application

Tectyl MP Amber gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can with Tectyl MP Amber well before use and spray at approximately 30 cm from the surface.  As the Tectyl MP Amber is a fast-drying product this can cause “pin-holing” when the product is applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.

Features TECTYL MultiPurpose Amber in Aerosol

• At the recommended DFT Tecyl Multipurpose Amber will protect against corrosion during stage, domestic and overseas transport
• It can protect parts stored outside as well, due to its excellent UV protection
• Is easy to apply and easy to remove, when no longer needed
• With a dry film thickness of only 50 microns, it can protect a big surface with just a little amount of the product
• Cures to an amber colored, waxy, semi-firm translucent film