Rust-Oleum 1085 Galva Zinc in a 1 kg can - Brushable

90% pure Zinc in a can

Rust-Oleum 1085 Galva Zinc in a 1 kg. can is a fast drying, zinc rich primer based on an epoxy ester resin for brush application. The product contains pure zinc as pigment and provides cathodic protection.

Rust-Oleum Cold Galvanizing Compound 1085 should be used on new, bare steel, blasted steel or galvanized steel surfaces. Primarily intended for brush application on small areas or for touch-up. It can be recoated with non-saponifiable coatings. Should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.

The No. 1. Zinc Coating (Brush)

• Matt grey appearance
• 90% zinc in the dry film (99% pure zinc)
• To protect bare, rust free metal and galvanised
• Ideal for touching-up larger areas
• Conforms to DIN 50.976 (1983)
• Resists 430 hours of salt spray testing (DIN)
• Heat-resistant up to 300°C
• For use on: New, bare steel, blasted steel or galvanized steel surfaces
• Formulation: Solvent-based
• Binder: Epoxy ester
• Finish: Matt Coverage: 13m²/l. at µm dry
• Touch dry (at 20˚C): 15 minutes
• Recoatable (at 20˚C): after 4 hours
• Recoatable with: non-saponifiable coatings
• Application: Brush application
• VOC level: 461 grams/liter
• Pack size: 1 kg