The Paint & NonPaint Store, Europe’s most extensive range! Europe’s most extensive range!

FINIXA GPS Cup System

3 Items

Set Descending Direction
per page

FINIXA GPS Cup System

FINIXA GPS Cup System is an innovative changing cup system that vacuums while spraying paint or lacquer. The FINIXA Green Paint System works with inner cups that you place in an outer cup. This outer cup is printed with mixing ratios so you can accurately mix the paint in the correct mixing ratio. You close this mixing cup with a lid that holds the paint strainer. Place the FINIXA GPS mixing cup system on your paint sprayer and spray paint or lacquer directly from the cup.

About the FINIXA Green Paint System

FINIXA Green Paint System is new and thus a highly innovative change cup paint system. The FINIXA GPS cup system uses an ultra-thin PET liner. By using recycled Polyethylene Terephthalate (PET), FINIXA is committed to a better environment. By using up to 50% less plastic than other systems, FINIXA GPS contributes to a plastic-free world. In addition, PET provides minimal friction with paint and is more resistant to chemicals than other LDPE materials. This leaves less paint residue in the mixing cup and significantly reduces the weight of waste.

How to use FINIXA GPS on paint sprayer?

FINIXA GPS is a special system that replaces the top cup of your paint sprayer. In this mixing cup system, in the same cup you prepare the paint, mix the lacquer and spray the paint from the mixing cup. Ready? Then you can seal and store the paint cup airtight. With the step-by-step plan below, you'll use FINIXA on your paint sprayer.

Take a FINIXA GPS inner cup and place it in the printed outer cup with mixing ratios. Immediately mix the paint or lacquer in this cup.

After mixing paint, take a lid with integrated paint strainer and press/turn it on the cup so that it is tightly sealed.

  1. Place the FINIXA GPS adapter on your paint sprayer and then turn your spray gun on the lid of the mixing cup by turning it a quarter turn.
  2. It is important to hold the paint spray gun upside down and pull the cock back. Doing this will cause the FINIXA Green Paint System to draw a vacuum. As soon as paint comes out of your paint sprayer, release the cock!
  3. You are now ready to spray paint or lacquer with the FINIXA GPS system!
  4. Are you ready? Then disassemble the FINIXA Green Paint System from your paint sprayer. The sealable caps allow you to store the paint in the mixing cup airtight.

Paint spray adapter for FINIXA GPS

To use the FINIXA Green Paint System, you need a paint sprayer adapter that you place on your spray gun so you can connect and use the FINIXA FPS. There are 8 different types of FINIXA GPS adapters for the paint sprayer. So you have a FINIXA Green Paint System adapter for every paint spray gun.

© Car Repair Online Products