MOTIP Silicone Spray in Aerosol
Lubricants Motip have been long been the most reliable partner in every workshop. This silicone spray gives high protection to virtually all parts. By applying and rubbing in of the silicone spray is applied a heat-resistant film layer that will ensure a water-repellent effect.
This silicone spray prevents among others freezing, drying, squeak, creak and is dirt and water repellent. suitable for all plastic rubber parts of your car, scooter, motorcycle, boat, home, etc. Spray some silicone spray on the rubber of your car door and it freezes no longer possible! Or spray some silicone spray between the rim and the tire, making the band a lot smoother and was very easy from the rim to centre or right to impose it.
Applications
- Squeaky plastic parts
- Door seals
- Dashboards
- Bumpers
- Guide rails (caravan awnings)
- Sunroofs
- Sliding
- Blades
- Assist in the unloading of molds
Product Features
- Excellent adhesion
- Water-repellent
- Prevents freezing and drying of rubber parts
- Eliminates squeaking and cracking of plastic parts
- Excellent mechanical and thermal stability
- Weather resistant
- Resistant to weak acids and bases
- Jet-spray
Features
- Base: Polydimethylsiloxane
- VOC content: Approximately 88% w / w
- Colour: Transparent
- Odour: Characteristic
- Density at 20 ° C: 0.72 g / ml
- Vapour pressure at 20 ° C: 3 to 4 bar
- Refractive index at 25 ° C: 1,403
- Dielectric strength: 14 kv / mm at a temperature of 20 ° C
- Resistance: 4 x 1015 ohm / cm
- Temperature resistance: -50 ° C to +200 ° C
- pH: Neutral
User
- Before use, read the instructions on the package and follow them.
- The aerosol at room temperature.
- Ideal processing temperature 5 to 30 ° C.
- Before use, shake the aerosol.
- Silicone spray applied in a thin layer.
- The best lubrication is obtained after the evaporation of the solvent (approximately 1 minute).