MOTIP PTFE Dry in Aerosol

High-quality, dry surface lubricant for the treatment of mechanical parts of metal and plastic with no oil or grease behind.

Applications

• Guide rails
• Folding Roofs
• Door locks
• Seatbelts
• Zippers
• Wipers
• Tow bars
• Guide rails chairs
• Hinges of furnaces
• Guide rails windows

Product Features

• Do not leave any grease or oil behind (dry film)
• Very low coefficient of friction
• Very good adhesion
• Prevents wear and sticking
• Suitable for parts which are subject to light loads and low speeds
• Resistant to weathering
• Suitable for unloading moulds
• Focused spray image

Features

• Base: Polytetrafluoroethylene
• VOC content: Approximately 99% w / w
• Colour; Transparent white
• Appearance: White powder
• Yield: 1.74 g / sec.
• Vapour pressure at 20 ° C: 3 to 4 bar
• Particle size: 5 microns
• Temperature resistance: -50 ° C to +250 ° C
• Drying time: Approximately 5 minutes

User

1. Before use, read the instructions on the package and follow them.
2. The aerosol at room temperature.
3. Ideal processing temperature 5 to 30 ° C.
4. Before use, shake the aerosol.
5. Apply PTFE dry in a thin layer.
6. After evaporation of the solvent (about 1 minute), a protective dry PTFE film is formed.