MoTip Engine Paint RED spray 400ml
MoTip Engine Paint RED spray
MoTip Engine Paint RED spray is a special heat resistant paint to spray your engine block in a new red color. This heat resistant engine paint is resistant to petrol, chemicals and weather influences. Thanks to the fact that this red engine spray paint is elastic, it is resistant to temperature fluctuations. On top of that this lacquer for engine blocks is scratch resistant and shock proof.
How to use RED engine spray paint
Always wondered how to spray an engine block in red? This MoTip Engine Paint red is the best heat resistant spray paint to paint your engine block in a new red colour. In just a few simple steps you can spray the engine block of your car.
- Pre Treatment: The surface should be clean, dry and free of grease.
- The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.
- Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30cm.
- Apply the lacquer in several thin layers. (Before applying the next layer, again shake the aerosol).
- After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
- The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
Features MoTip Engine Paint RED spray
- Resistant to petrol, chemicals and weather influences
- Elastic, resistant to temperature fluctuations
- Good filling property
- Lasting gloss
- Scratch free and shock proof
- Corrosion preventive
- Reduces the adhesion of dirt
- Non-fading (UV-resistant)
- Good adhesion
| SKU | M04091 |
|---|---|
| Brand | MoTip |
| Minimum Coverage m² | 1 m² |
| Weight | 400 g |
| EAN | 8711347040919 |
| Category | Heat Resistant Paint |
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
