MOTIP Cycling Disc Brake Conditioner in 400ml Aerosol
High quality spray to condition of disc brakes.
Applications
- Disc brakes
Product characteristics
- Prevents wear and sticking
- Excellent thermal stability
- Resistant to chemicals and weather influences
- Resistant to water, salt and weak acids and bases
- Excellent adhesion
- Focused spray image
Physical and Chemical Characteristics
- Contents : 400 ml
- Basis : Lithium Grease / Graphite
- VOC-content : Approximately 94% w/w
- Colour : Anthracite
- Scent : Characteristic
- Appearance : Paste
- Relative density at 20°C : 0,95 g/ml Yield : 1,0 g/sec
- Vapour pressure at 20°C : 3 to 4 bar
Usage
- Before use, read the instructions on the package and act accordingly
- The aerosol at room temperature.
- Best processing temperature 5 to 30°C.
- Before use, shake the aerosol.
- Disassemble the brake pads.
- Clean the brake pads and the brake disc with MOTIP Brake Cleaner.
- The surface must be dry and free of grease.
- Apply the disc brake conditioner in a very thin layer by repeatedly, briefly pressing the nozzle.
- In order to obtain the optimum brake capacity, after assembly firmly brake a few times while biking.
| SKU | M000278 |
|---|---|
| Brand | MoTip |
| Minimum Coverage m² | 1.5 m² |
| Weight | 400 g |
| Maximum Coverage m² | 2 m² |
| Category | MoTip cycling |
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
Be the first to review this product and help other customers make their decision.
