• check 100 days returns & exchanges

MoTip Backlight Transparent Spray Red 400ml

(1)
  €11.35
€11.35 excl. VAT
  1. Complete your purchase
  2. Product information
  3. Specifications
  4. Frequently Asked Questions
  5. Product reviews
Complete your purchase
  • CROP Masking Tape 18mm - per piece
    Premium Quality
    (1)
    €1.49 €1.49
  • CROP Masking Tape 36mm - per piece
    Premium Quality
    (1)
    €2.97 €2.97
Product information

MoTip Backlight Red spray

MoTip Backlight Red spray is a special spray can with transparent lacquer to spray the rear lights and/or headlights of your car. This MoTip Backlight spray is transparent Red, which gives your taillights a nice Red smoked look. The Red MoTip Backlight spray has good adhesion and is resistant to all weather influences. Thanks to the high quality, the transparent Red paint stays beautiful and scratch-free for a long time.

How to spray the rear lights Red?

Do you want to spray the rear lights Red with this MoTip Backlight spray? In 5 simple steps you can use this special lacquer spray correctly.

  1. Spray several thin layers until the desired result is achieved.
  2. Keep a spraying distance of 25cm to 30cm.
  3. Shake the spray well between coats to keep the pigments mixed.
  4. Allow a short break between coats for the paint to dry and evaporate.
  5. Ready? Turn the spray can over and press the spray cap so the vential will be clean.

Characteristics MoTip Backlight spray

  • Special transparent lacquer for backlights and headlights
  • Has an excellent adhesion to the surface
  • Paint is scratch free and shock proof
  • Resistant to all weather influences
  • Not suitable for polycarbonate
Specifications
SKU M00261
Brand MoTip
Minimum Coverage m² 1.5 m²
Weight 400 g
Maximum Coverage m² 2 m²
Category Transparent Paint
All specifications
Frequently Asked Questions

Should clear coat be applied over car paint?

Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.

Product reviews
5/5
Based on 1 review
Spray in layers
First, degrease the surface to be sprayed. I do this with Motip degreaser. Then with a spray distance of about 20 cm spray a thin layer. let it dry for 5 minutes and then continue with another thin layer and repeat this step until you see the desired result. Works super!
N |
Translated from Dutch

Recently Viewed