MIPA CX11 2K Air Dry Clear Coat - 1 liter
MIPA CX11 Air Dry Clear Coat
MIPA 2K-Express-Klarlack CX 11 is a clearcoat of low viscosity for a quick and efficient refinish, that generally does not require oven drying. Thanks to its special formulation MIPA CX 11 cures very quickly already at room temperature (20° C) and can be polished manually after only approx. 50 minutes. A more intensive polishing by machine is possible after approx. 90 minutes. It is therefore possible to save significantly heating-related costs. In the same time, cycle times are reduced since the painting process must not be interrupted by heating intervals.
2K Air Dry Clear Coat for all types of car paint
MIPA 2K CX 11 is particularly suitable for partial car coating and for spot-repair. Ready for use after the addition of hardener. This product provides resistance against all environmental and climatic conditions and yellowing and offers durable gloss retention as well as an excellent scratch resistance.
Air Dry Clear Coat forced to dry?
Do you want to force the freshly sprayed clear coat to dry by means of an infrared heater, a spray booth or other hot location? That's possible! At 60°C, it is already cured after 20 minutes and it can be reassembled after 30 minutes. With an infrared dryer, it is already cured in just 10 minutes!
Hardener for MIPA CX11 Air Dry Clear Coat
When purchasing the MIPA CX11 clear coat, we also recommend ordering the corresponding hardener. The hardener is necessary, otherwise it cannot cure. The mixing ratio is 2 : 1 (to 2 liters of paint, 1 liter of MIPA HS25 Hardener Standard must be added).
Do I need to use thinner?
MIPA CX11 is ready for spraying after addition of hardener, so no thinner is needed.
Features MIPA CX11 Air Dry Clear Coat
- Low viscosity
- Quick and efficient refinish
- Cures very fast
- Suitable for partial car coating and spot-repair
- Ready to use after the addition of hardener
- No thinner needed
Processing instructions
- High gloss clear coat
- Colourless
- Dust dry after 10 minutes at 20°C
- Fully cured after 60 minutes at 20°C
- Fully cured after 30 minutes at 60°C
- Can be polished after 90 minutes!
- Application: 1,2mm or 1,3mm (2 to 2,5 Bar)
- Spray viscosity: 11 to 13 seconds DIN CUP 4mm
- Processing temperature is 18 to 25°C
- Mixing ratio 2:1 with MIPA HS25 Hardener