Hammerite Hammerite Spray

As low as: €17.70
€17.70 excl. VAT
  1. Complete your purchase
  2. Product information
  3. Specifications
  4. Product reviews
  5. Blog
Complete your purchase
  • 3M 8822 Dust mask Aura FFP2 - 10 pieces
    (3)
    €19.99 €19.99
  • Hammerite Anti Rust Spray
    €15.65 €15.65
  • CROP Sanding Pad grit 280 - 100x120mm
    Premium Quality
    €2.07 €2.07
  • Hammerite Degreaser Metal Spray
    (1)
    €11.62 €11.62
  • Hammerite Metal Varnish Spray - Transparent
    €17.39 €17.39
  • CROP Masking Tape 18mm - per piece
    Premium Quality
    (1)
    €1.49 €1.49
  • Hammerite Hammerite paint
    As low as €12.76 €12.76
  • CROP Sanding Pad grit 220 - 100x120mm
    Premium Quality
    (2)
    €2.07 €2.07
  • Hammerite Metal Paint Sprayer - High Gloss
    €18.06 €18.06
  • CROP Masking Tape 36mm - per piece
    Premium Quality
    (1)
    €2.97 €2.97
  • CROP ScuffX Sanding Fleece VFN Fine - Red
    Premium Quality
    (2)
    €3.30 €3.30
  • CROP ScuffX Sanding Fleece UFN Super Fine - Gray
    Premium Quality
    (2)
    €3.30 €3.30
Product information

Hammerite Hammerite Spray

Hammerite Hammerite Spray is a high gloss metal paint with hammered effect. Hammerite Hammer effect spray can be sprayed directly over rust where the metal paint stops the rust process. Hammerite hammered effect metal paint spray can be used on all types of ferrous metal, both new and rust and damaged metal. This high quality hammer effect paint has high hiding power and provides durable metal protection. Hammerite metal spray paint is available in 4 hammer effect colors.

Colors Hammerite hammerfinish paint

Hammerite spray can hammerfinish paint can be ordered in 4 different colors. Each color of Hammerite Hammerite spray paint has high coverage and adhesion to metal. At CROP you can buy the Hammerite colors of hammerite paint below.

  • Hammerite black
  • Hammerite dark green
  • Hammerite silver gray
  • Hammerite white

How to use Hammerite hammerfinish spray paint?

Spray can Hammerite hammerfinish paint is easy to use thanks to the convenient spray. With the Hammerite aerosol can hammer paint, you do not need a roller or brush. Use the step-by-step plan below on how to use the Hammerite hammer spray paint.

  1. Remove loose paint and rust with a wire brush or sandpaper.
  2. Clean and dust the surface to be sprayed with Hammerite Metal Degreaser.
  3. Spray non-ferrous metal? Treat these first with Hammerite Adhesion Primer.
  4. Spraying Hammerite Hammerite over an existing paint? If so, do a test piece first before spraying. If after one hour the lacquer layer does not show any defects (such as crackle), you can use the Hammerite Hammerite paint. Otherwise, you need to sand off all the paint first.
  5. Tape the area well with masking paper and painter's tape.
  6. Shake spray can well at least 3 minutes before use.
  7. Apply at least 3 thin layers and spray in a smooth motion.
  8. Keep a spraying distance of 30cm.
  9. Tip: never hold the spray can still while spraying, this prevents sags.
  10. Note: the spray can should be at room temperature.

Characteristics Hammerite hammerfinish spray

  • High quality hammerfinish paint
  • Metal paint with hammered effect
  • Can be applied directly over rust
  • Adheres to all ferrous metals
  • Can be used without primer or undercoat
  • Stops rust
  • Fast drying paint
  • Gives lasting protection
  • Wear-resistant
  • Retains its color for a long time
  • Dust-dry after 1 to 2 hours
  • Yield: 3m² per 400ml spray can
Specifications
SKU conf_hammerite-hamerslag-spuitbus
Brand Hammerite
Minimum Coverage m² 1,5 m²
Weight 400 g
Maximum Coverage m² 2 m²
Category Hammered Paint
All specifications
Product reviews
Be the first to review this product and help other customers make their decision.
Blog