FINIXA Plastifill 2K Polyester Putty for Plastic + Hardener

FINIXA Plastifill 2K Polyester Putty for Plastic

FINIXA Plastifill 2K Putty is specially developed for filling plastic surfaces. It is ultralight, has a high flexibility and creates a smooth finish. FINIXA GAP70 is the best 2-component putty for filling plastic surfaces.

Special 2K Putty for Plastic

FINIXA 2K Plastifill is a polyester putty for plastic. Thanks to the high flexibility, the plastic putty remains elastic after curing and does not shrink. This putty creates a super smooth end result!

2K Putty with built-in sanding guide

FINIXA GAP70 Plastifill Putty has a built-in sanding guide: during sanding the putty fades from dark grey to light grey.

FINIXA GAP70 Plastifill Putty can be used on

FINIXA Plastifill Polyester Putty can be used as a 2-component putty on all types of plastic and fiberglass surfaces.

Features FINIXA GAP70 Plastifill Putty

• Special 2K putty for plastic
• Ultralight putty
• Easy to mix and apply
• For filling small and large holes
• Very high flexibility
• Fast & easy sanding
• Can also be used on fiberglass
• Putty and sanding guide in one
• Smooth finishing

What is the mixing ratio?

• Mix with 2 to 3% hardener. If in doubt, use a scale during mixing. Too much hardener not only causes too fast hardening but can also lead to detachment through paint.
• Carefully mix the putty with hardener and avoid withdrawing air. Air bubbles result in imperfections during application and sanding.
• Choose the right putty for the right application.