1K Acrylic filler in Aerosol
Colormatic 1K Spot Sealer Filler is a professional, quick drying and universal 1-component primer of MoTip Dupli-Color with excellent adhesion, filling strength and corrosion protection for all metal substrates. Can be sprayed with all common water-based and synthetic base coat and 1K and 2K topcoat systems. Depending on the layer thickness as well as primer and filler to use. Also ideal for spot repairs.
Colormatic 1K Filler is quick-drying and has a very high hiding power, high filling capacity and good corrosion protection ColorMatic Professional 1K Filler is both wet and dry sandable and has good adhesion.
CMP 1K Spot Sealer Filler spray can available in 2 colors
CMP 1K Acrylic Filler is available in the colors beige and gray. These are optimally adjusted to the respective shade or brightness level of the substrate. This ensures better coverage and color accuracy with lower material consumption. An essential advantage if you want to achieve the best results.
Properties of the CMP 1K Acrylic Filler
- Advanced 1K acrylic filler with excellent filling properties and coverage
- Wet-on-wet application possible
- Very good for filling minor scratches and uneven areas on sanded undercoats
- Good adhesion to all metal surfaces
- Very smooth flow
Physical and chemical properties
- Basis of binder: Acrylic resin
- Colour: beige (856556) and grey (874987)
- Smell: Solvent
- Efficiency: 400ml are sufficient for approx. 1,25 - 1,75 m²
- Substrate: blank metall, sanded, priming of spare parts, sanded, cured paintings, sanded, polyester substrates, sanded, steel, sanded and aluminium, sanded
- Temperature resistance: to110°C
- VOC-value: 217g
How do I spray these 1-component primer from Colormatic?
We recommend that you first de-stain the damaged area and clean thoroughly with a silicone remover. This ensures that the surface is clean, free of grease and dust. Then shake the aerosol can well for 2 minutes and first spray a test piece before using the product.
- Remove rust, sand the surface and clean with a silicone remover
- Shake the aerosol for at least 2 minutes, counting from the audible part of the balls
- Spray a test piece and check the color.
- Apply several thin layers at a distance of 15 to 20 cm.
- After use, replace canister and spray valve
Notes:
- Wear personal protective equipment (respiratory protection Type: A2 / P2, protective gloves such as latex or nitrile)
- After spraying, we advise you to turn the aerosol can on its head and empty the built-in suction tube.
