Bostik Born2Bond Structural Cyanoacrylate Adhesive 50 gram + 8 Mixer Tips

Bostik Born2Bond Structural Cyanoacrylate Adhesive 50 grams with 8 Mixer Tips

Bostik Born2Bond Structural Cyanoacrylate Adhesive 50 grams with 8 Mixer Tips is an innovative, high-strength 2K hybrid adhesive for structural joints. This hybrid 2K adhesive combines fast setting time with the ability to fill large gaps (up to 5mm) and adheres to a wide range of materials. The balance between fast cure and wide open time makes this product ideally suited for industrial assembly and repairs requiring high performance.

What is Bostik Born2Bond Structural Cyanoacrylate Adhesive used for?

Bostik Born2Bond Structural is used as a cyanoacrylate adhesive for applications where a strong, durable bond is needed between a variety of materials, often in static or dynamic loads. Bostik's 2K Cyanoacrylate adhesive is widely used in metal-to-metal, plastic-to-metal, magnets, glass, wood and composite bonding applications. In addition, this Bostik Born2Bond adhesive is suitable for structural assemblies, magnetic bonding and repairs where high mechanical loads are expected.

Applications of Born2Bond Structural at a glance:

• Structural joints in structures and machinery
• Bonding of magnets and metal components
• Assembly of plastics, glass and wood
• Repairs of load bearing parts

Here's how to use Born2Bond Structural Cyanoacrylate Adhesive for optimal results

Make sure surfaces are clean, dry and grease-free. Mix part A and part B via the mixer tips provided until homogeneous. Apply the mixed adhesive to one of the joint surfaces and assemble immediately; clamp or fix the parts so there is no movement during curing. The joint must rest for 24 hours to achieve full strength.

Benefits Bostik Born2Bond Structural adhesive are:

• High structural strength, suitable for stressed joints
• Fills gaps up to 5mm, less pre-machining required
• Transparent and abrasion resistant after curing
• Broad material coupling: metals, plastics, wood
• Good resistance to temperature and moisture

Features Bostik Born2Bond Structural 2K Cyanoacrylate Adhesive 50 grams

• 50 gram syringe supplied with 8 Mixer tips, ready to use immediately
• Transparent adhesive after curing for aesthetic results
• Hybrid cyanoacrylate / acrylic base, for structural performance
• Temperature range: -40°C to +120°C, suitable for various environments
• Open time of 25 minutes, for flexibility in assembly
• Fixation time approximately 30-90 seconds, fast initial cure
• Bond strength > 6 MPa after 5 minutes, depending on the material
• Filling capacity up to 5 mm, for processing tolerance differences