SATA 584 Compressed Air Filter 3-stage

SATA 584 Compressed air filter 3-stage

SATA 584 Compressed Air Filter is a 3-stage oil and water separator to ensure 100% clean compressed air. This SATA 584 compressed air filter has a 3,800 Nl/min air flow rate and 4 connections. This professional compressed air filter from SATA is maintenance free because it is only under

Best filter for compressed air

With a filter filtration of 99.998%, this SATA 584 is the best filter for compressed air. With this high-quality oil and water separator from SATA, you are assured of 100% clean compressed air from the compressor. This makes this SATA air filter ideal for working with full face masks and products respiratory protection, as well as working with water-based and solvent-based lacquer or paint.

What to use SATA 584 filter for?

• Solvent-based paint
• Thinner lacquer
• 2K lacquer
• Water-based paint
• Breathing protection

Connections

• Air inlet: G 1/2" internal thread
• Air outlet: 1/4" external thread

Technical Data SATA 584 Filter

• Sintered filter: 5 µm (micron)
• Fine filter: 0.01 µm (micron)
• 100% technically particle-free air
• Activated carbon filter: oil vapors
• Airflow at 6 bar (87psi): 3,800 Nl/min (135cfm)

Features SATA 584 Compressed air filter

• Higher contaminant uptake (compared to SATA filter 484) due to new sintered activated carbon filter
• Synchronous maintenance: Filter maintenance required only every 6 months for all stages
• Maintenance-free bayonet lock with haptic and acoustic feedback
• Fine filter and activated carbon filter cartridges fit perfectly as they are easily inserted - without screw connections or additional seals
• Upgrade from a SATA filter 544 to a 584 possible via a simple connector system
• Maintenance-free sealing elements, no replacement of o-rings during maintenance
• The filter package is fully reversible to accommodate different locations of filtration units in the cabin
• Pipe connection optionally on the left or right
• Air regulator located on the air outlet side, resulting in better airflow and less loss of air efficiency
• Airflow at 6 bar (87psi): 3,800 Nl/min (135 cfm)
• Improved cfm output results in the ability to supply clean air to 4 painters, spray guns and SATA Air Vision 5000 fresh air systems without loss or reduction of compressed air
• Improved water cyclone device resulting in more consistent airflow
• Standard automatic drain feature on models with sintered filter
• Color-coded canisters corresponding to filter colors (yellow; sintered filter, blue; fine filter, black; activated carbon filter)
• Improved carbon filter - new and improved sintered carbon filter that does not break down as quickly as the previous carbon filter, with an improved replacement schedule of 6 months as opposed to 3 months on the previous model
• Improvements to filter canister connections for easier filter replacement
• 99.998% technically particle-free air
• Easy wall mounting
• Accessory port for CO2 monitor
• SATA adam 2 digital pressure gauge capability