Rust-Oleum Galva Zinc-Alu in a 1kg can - Brushable

Cathodic protection & aesthetics in one with a Sparkling aluminium finish

Rust-Oleum Galva Zinc-Alu in a can is a fast drying, zinc rich coating based on an epoxy ester resin for brush application. The product contains pure zinc and aluminium as pigments and provides cathodic protection.

Rust-Oleum Bright Galvanizing 1017 should be used on new, bare steel, blasted steel or galvanized steel surfaces. Primarily intended for brush application on small areas or for touch-up. Can be recoated with non-saponifiable coatings. Should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas.

Cathodic protection & aesthetics in one.

• Sparkling aluminium finish (80% zinc, 10% alu)
• Compromise between a protection and finish
• For new, bare, rust free metal or galvanised steel
• Resists 340 hours of salt spray testing (DIN)
• Heat-resistant up to 100°C
• To handle after 3 hours (at 20°C)
• Coverage: 10.5 m²/l
• For use on: New, bare steel, blasted steel or galvanized steel surfaces
• Formulation: Solvent-based
• Binder: Epoxy ester
• Finish: Sparkling
• Coverage: 11.5m²/l. at µm dry
• Touch dry (at 20˚C): 30 minutes
• Recoatable (at 20˚C): Not applicable
• Recoatable with: Not applicable
• Application: Brush application
• VOC level: 497 grams/liter
• Pack size: 1 kg