Rust-Oleum 2180 Galva Expresse Zincprimer in 500ml Aerosol
- 100 days returns & exchanges
- Customer reviews: 4.38/5 (723 reviews)
The super-fast Zinc primer
Rust-Oleum Galva Expresse is a very fast drying zinc rich primer based on a styrene-acrylic resin. The product contains pure zinc as pigment and provides excellent protection against corrosion. The super-fast Zinc Primer should be used on new, bare steel or galvanised steel surfaces. Galva Expresse 2180 is intended to be applied on small areas or for touch-up. Can be recoated with non-saponifiable coatings. The product should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.
The super-fast Zinc primer
- Matt grey appearance
- To handle after just 10 minutes (at 20°C)
- For new, bare, rust free metal or galvanised steel
- Resists 400 hours of salt spray testing (DIN)
- Heat-resistant up to 350 °C
- Ideal for production and construction work
- For use on: New, bare steel, blasted steel or galvanized steel surfaces
- Formulation: Styrene-acrylic
- Binder: Epoxy ester
- Finish: Matt
- Coverage: 1.4 m² per spay can at 35 μm dry
- Touch dry (at 20˚C): 5 minutes
- Recoatable (at 20˚C): Within 1 hour or after 48 hours
- Recoatable with: non-saponifiable coatings
- Application: Aerosol
- VOC level: 645 grams/liter
- Pack size: 500 ml
| SKU | RO-2180 |
|---|---|
| Brand | Rust-Oleum |
| Minimum Coverage m² | 1 m² |
| Weight | 500 g |
| EAN | 8715743005886 |
| Category | Industrial Paint |
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
